Abstract:Swirl-vane separator in nuclear steam generator is used as primary separator for separating more than 80% of the water from the swam-water mixture to feed the qualified steam to dryers and turbines. Laboratory tests are generally performed to seek alternatives for separator design and performance improvement. Though great efficiency is often obtainable in the reduced model, the performance of the full-sized prototype is not well predicted due to the lack of proven similarity analysis. In our previous study, a theoretical model for critical droplet diameter, grade efficiency and overall separation efficiency has been established to predict separator performance (Liu and Bai, 2016). Based on the model, the aim of this paper is to study the separation performance of downscaled separator and to identify important differences between small-scale and large-scale separators. Experiments are carried out on a small-sized swirl-vane separator using air and water as working fluids. Firstly, the characteristics of gas-liquid separation process are visually observed using high-speed camera to understand the operating principle of the separator. After that, the separation efficiency is measured over a wide range of flow conditions, and the gas and liquid velocities influencing the separator performance is analyzed in detail. The experimental data are then used with previous theoretical model to predict the performance of two larger separator prototypes. When model separator has a same shape but reduced size as that of prototypes, and their working pressure and gas-liquid superficial velocities are the same, the results indicate that the model separator has a significantly greater separation efficiency than the prototypes. Generally, the larger scale the prototypical separator is, the lower value the separation efficiency becomes.

Emulation and experimental research on separation characteristics of piston-type separator

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Numerical studies of the influence of particles' size distribution characteristics on the gravity separation performance of Liquid-solid Fluidized Bed Separator

Experimental Study of the Separation Performance of a Square Separator Assuming a Horizontal Heat Exchange Mode

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator

Design for separation efficiency test stand of oil separator used in compressors

Numerical Simulation and Experimental Study on the Performance of Gas/Liquid Spiral Separator

Performance Investigation of Double V Type Inertia Separator

Experimental Study on Two Different Gas-Liquid Separators Under Different Flow Patterns

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Experimental Research on the Performance of a Cyclone Impeller Type Separator

Numerical Simulation on the Performance of Axial Vane Type Gas-Liquid Separator with Different Guide Vane Structure

Proposing a Method for Performance Evaluation of a Designed Two-Phase Vertical Separator and a Piston Pump Using Computational Fluid Dynamics

Experimental Study and Similarity Analysis of Separation Efficiency of Swirl-Vane Separator

Study of the separation efficiency of a demister vane with response surface methodology

Experimental investigation on separation characteristics of axial cyclone separator

Characteristic of Separation and Numerical Simulation of Finest Particles in Cyclone Separator

Experimental Research on Separation Performance for Square Cyclone Separator under Different Constructional Details

Numerical simulation of the effects of the internal components on the uniformity of the flow field in a tubular separator

Simulation and Experimental Validation of a New Separator Design for a Wide Range of Gas Volume Fractions