Abstract:Rotor unbalance and rub-impact are major concerns in rotating machinery. In order to study the dynamic characteristics of these machinery faults, a dual-disc rotor system capable of describing the mechanical vibration resulting from multi-unbalances and multi-fixed-point rub-impact faults is formulated using Euler beam element. The Lankarani–Nikravesh model is used to describe the nonlinear impact forces between discs and casing convex points, and the Coulomb model is applied to simulate the frictional characteristics. To predict the moment of rub-impact happening, a linear interpolation method is carried out in the numerical simulation. The coupling equations are numerically solved using a combination of the linear interpolation method and the Runge–Kutta method. Then, the dynamic behaviours of the rotor system are analysed by the bifurcation diagram, whirl orbit, Poincaré map and spectrum plot. The effects of rotating speed, phase difference of unbalances, convex point of casing and initial clearance on the responses are investigated in detail. The numerical results reveal that a variety of motion types are found, such as periodic, multi-periodic and quasi-periodic motions. Moreover, the energy transfer between the compressor disc and the turbine disc occurs in the multi-fixed-point rubbing faults. Compared with the parameters of the turbine disc, those of the compressor disc can affect the motion of the rotor system more significantly. That is, the responses exhibit simple 1T-periodic motion in the wide range of rotating speed under the conditions of sharp convex point and larger initial clearance. These forms of dynamic characteristics can be effectively used to diagnose the fixed-point rub-impact faults.

PARAMETER EFFECT ON THE TOUCH-RUBBING BIFURCATION OF SQUEEZE FILM DAMPER-ROTOR SYSTEM

The Effect of Bistable Jump on the Reliability of Squeeze Film Damper

Modal Frequency and Stability of Rotor System Supported by Viscoelastic Elastomeric Dampers

Bifurcation Behavior of a Flexible Rotor Supported on Nonlinear Squeeze Film Dampers Without Centralized Springs

Nonlinear Characteristics of the Rub-Impact Response of a Rotor System Supported on Squeeze Film Dampers

ANALYSIS OF THE MULTIPLE-SOLUTION RESPONSE OF A FLEXIBLE ROTOR SUPPORTED ON NON-LINEAR SQUEEZE FILM DAMPERS

Influence of width of squeeze film damper on the transient response of rotor systems

Investigation on the Bistable Jump in Subcritical Speed Range of Rotor Supported on Uncentralized Squeeze Film Dampers

Dynamical Behaviors of Hybrid Squeeze Film Damper for Rotor System Vibration Control

Occurrence of bistable state in squeeze film damper-rotor system

Rub-Impact Phenomenon of Rotor System with Initial Bending and Asymmetric Stiffness

Effect of SFD on rubbing-induced vibration characteristics in dual-rotor-blade-casing system

Response Analysis of a Dual-Disc Rotor System with Multi-Unbalances–multi-fixed-point Rubbing Faults

Influence of the Squeeze Film Damper on the Dynamic Performance of Rotor Sliding Bearing System

Study on the Nonlinear Characteristics of an SFD Supported Rotor System with Impact-Rub and a Transverse Crack

Dynamics of A Rotor Supported on Magnet-Rheological Fluid Squeeze Film Damper

Bifurcation analysis of rotor–squeeze film damper system with fluid inertia

The effect of squeeze film damper parameters on the unbalance response and stability of a flexible rotor

Dynamic Analysis of a Coupled Dual-Rotor With Squeeze Film Damper Considering Sudden Unbalance

Bifurcation Analysis of A Rigid-Rotor Squeeze Film Damper System with Unsymmetrical Stiffness Supports

Bifurcation and Chaos Characteristics of the Responses of an Over-hung Rotor System with Dual Disks