Abstract:By using a new type of laser surveying instrument named particle image velocimetry (PIV), the flow field inside a rotary tubular membrane separator with a rotating inner tubular microfiltration membrane and a transparent outer cylinder was measured experimentally, and from which some new observations were resulted. Pairs of stable Taylor vortices with similar dimensions and opposite flowing directions were directly visualized by the measured streamlines and vorticity of flow field in the annular gap of the membrane separator. No matter how the axial Reynolds number, radial Reynolds number and Taylor number changed, the dimensions of the Taylor vortices and the distances between the centers of adjacent Taylor vortices were almost the same, but the shapes of the Taylor vortices at lower Taylor numbers were more regular than those at higher Taylor numbers. The Taylor vortices disappeared because of the turbulence when the Taylor number was too high. The maximum axial velocity near the membrane surface was about 20 times larger than the mean velocity of axial flow inside the annular gap, and the maximum outward radial velocity near the membrane surface was even about 3000 times larger than the average velocity of the radial permeating flow through the tubular microfiltration membrane. The large velocities near the membrane surface, which were due to the Taylor vortices, could prevent solid fine particles from depositing onto the membrane surface and/or entering into the membrane pores and therefore result in reduced concentration polarization and reduced membrane fouling. The results in this study provided some valuable guidelines on the hydrodynamic way to reduce membrane fouling.

Study of Filtration Mechanism of Rotary Polyethylene Tubular Membrane

Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

Study on the Flow Field Inside the Microfiltration Separator with Rotary Tubular Membrane

Separation of Oil–water Emulsion by Disc Ceramic Membrane under Dynamic Membrane Filtration Mode

Research on microfiltration with rotary polypropylene tubular membrane separator

STUDY ON THE SEPARATION CHARACTERISTICS OF DIFFERENT FLOW PATTERNS IN ROTARY TUBULAR MICRO-FILTRATION MEMBRANE SEPARATORS

Theoretical Study on Dynamic Filtration with the Membrane in Simple Harmonic Motion

Suspended Particle Motion Close to the Surface of Rotating Cylindrical Filtering Membrane

Study on the model of partial blocking filtration mechanism in constant-rate microfiltration process of non-Newtonian fluid

Preparation of polyethylene porous tube membrane and fouling mechanism during the filtration process

FLOW FIELD INSIDE ROTARY TUBULAR MEMBRANE SEPARATOR

Establishment and Mechanism Investigation of Partial Blocking Filtration Model of Microfiltration

Study on the Filtration Mechanism of UHMWPE Tubular Micro-filtration Membrane

Study on the Membrane Fouling of the Process of Using Two Layer Flat-Sheet Membrane for Sludge Thickening and Water Reuse

Fouling Characteristics of a Novel Rotating Tubular Membrane Bioreactor

Rotating a helical membrane for turbulence enhancement and fouling reduction

Estimation of Fouling Stages in Separation of Oil/water Emulsion Using Nano-Particles Al2O3/TiO2 Modified PVDF UF Membranes

Dual-objective for the Mechanism of Membrane Fouling in the Early Stage of Filtration and Determination of Cleaning Frequency: A Novel Combined Model

The Research and Development of Microfiltration Mechanism Model for Dispersions using Turbular Membrane

Filtration of Anaerobic Sludge Mixed Liquor Using Double-Shaft Rotary Ultrafiltration Membrane Module

Analysis on the Bi-directional Filtration Resistances of Porous Ceramic Membrane