Abstract:Pervaporation (PV), recognized as a separation technology with vast potential, is highly dependent on the fluid flow patterns within the membrane module, which play a critical role in local mass transfer processes on the membrane surface. In this study, computational fluid dynamics (CFD) was employed to simulate two different flow channel designs for a PV membrane module, with experimental verification of the model’s accuracy. The results indicated that the parallel inlet–outlet and wavy flow channel design (Mode II) significantly improved the feed-side concentration and temperature distribution, leading to a 3.7 % increase in feed-side flow velocity. Further investigation into the effects of three membrane pool structural parameters on separation performance revealed that pressure drop was most significantly influenced by the inlet radius, while the wavy length-to-height ratio (L:H) has the greatest impact on separation performance. After optimization, the optimal membrane module structure was determined to be the baffle depth of 4 mm, the inlet radius of 1 mm, and the L:H of 1:1. Based on this optimized structure, the effects of operating conditions on separation performance were further explored. The study showed that increasing feed flow rate significantly enhanced separation performance, while increasing feed temperature and concentration intensified temperature and concentration polarization on the membrane surface. Through multi-objective optimization, the optimal operating conditions were determined to be the feed flow rate of 20 L·h-1, feed temperature of 55 °C, and feed concentration of 3 wt%. This study provides valuable theoretical insights and technical references for the design of PV membrane pool flow channels and the selection of operational conditions.

STUDY ON THE SEPARATION CHARACTERISTICS OF DIFFERENT FLOW PATTERNS IN ROTARY TUBULAR MICRO-FILTRATION MEMBRANE SEPARATORS

Study on the Flow Field Inside the Microfiltration Separator with Rotary Tubular Membrane

Separation of Oil–water Emulsion by Disc Ceramic Membrane under Dynamic Membrane Filtration Mode

FLOW FIELD INSIDE ROTARY TUBULAR MEMBRANE SEPARATOR

Research on microfiltration with rotary polypropylene tubular membrane separator

Study of Filtration Mechanism of Rotary Polyethylene Tubular Membrane

Application and performance of Dean vortices flow with spiral modules on membrane separation

Experimental investigation on separation characteristics of axial cyclone separator

Experimental Study on Two Different Gas-Liquid Separators Under Different Flow Patterns

Numerical Simulation of Velocity and Streamlines in Annular Gap of Rotary Tubular Membrane Separator

Experimental Investigation on the Separation Characteristics of the Novel Combined Separator

FLOWPATTERN EFFECT ON THE SEPARATION PERFORMANCE IN CENTRIFUGAL SEPARAT OR

Numerical Study on the Flow Field and Separation Efficiency of a Rotary Drum Separator

Research and Application Development of Rotary Tubular Membrane Separators

Study on Flow Mechanism and Separation Performance of Oil-water Separation Hydrocyclone

Experimental Investigation on the Separation Performance for a New Oil-Water Separator

Experimental Study of the Separation Performance of Guide Vane Hydrocyclone

Experimental study on a compact axial separator with conical tube for liquid-liquid separation

Developments of Rotating Tubular Membrane Separators

Experimental Study on the Flow Behaviors in a Vane-Type Separator

Flow Channel Simulation and Optimization Design of Pervaporation Membrane Pool Based on Heat-Mass-flow Coupling