Abstract:Functional electrical stimulation (FES) is widely used in neurorehabilitation to improve patients' motion ability. It has been verified to promote neural remodeling and relearning, during which FES has to produce an accurate movement to obtain a good efficacy. Therefore, many studies have focused on the relationship between FES parameters and the generated movements. However, most of the relationships have been established in static contractions, which leads to an unsatisfactory result when applied to dynamic conditions. Therefore, this study proposed a FES control strategy based on the surface electromyography (sEMG) and kinematic information during dynamic contractions. The pulse width (PW) of FES was determined by a direct transfer function (DTF) with sEMG features and joint angles as the input. The DTF was established by combing the polynomial transfer functions of sEMG and joint torque and the polynomial transfer functions of joint torque and FES. Moreover, the PW of two FES channels was set based on the muscle synergy ratio obtained through sEMG. A total of six healthy right-handed subjects were recruited in this experiment to verify the validity of the strategy. The PW of FES applied to the left arm was evaluated based on the sEMG of the right extensor carpi radialis (ECR) and the right wrist angle. The coefficient of determination ( R 2 ) and the normalized root mean square error (NRMSE) of FES-included and voluntary wrist angles and torques were used to verify the performance of the strategy. The result showed that this study achieved a high accuracy ( R 2 = 0.965 and NRMSE = 0.047) of joint angle and a good accuracy ( R 2 = 0.701 and NRMSE = 0.241) of joint torque reproduction during dynamic movements. Moreover, the DTF in real-time FES system also had a nice performance of joint angle fitting ( R 2 = 0.940 and NRMSE = 0.071) and joint torque fitting ( R 2 = 0.607 and NRMSE = 0.303). It is concluded that the proposed strategy is able to generate proper FES parameters based on sEMG and kinematic information for dynamic movement reproduction and can be used in a real-time FES system combined with bilateral movements for better rehabilitation.

Applications P-type iterative learning control method on multi-articular movement of upper extremities during functional neuromuscular stimulation

Application of P-type iterative learning control in functional neuromuscular stimulation feedback control for upper limbs

Adaptive Iteration Learning Control and Its Applications for FNS Multi-Joint Motion

Iterative Learning Control of Functional Electrical Stimulation Based on Joint Muscle Model

Neural Network Based Modeling and Control of Elbow Joint Motion under Functional Electrical Stimulation

Fuzzy Control Method with Application for Functional Neuromuscular Stimulation System

Functional Neuromuscular Stimulation Limb Motion Control Using Adaptive Iterative Learning Algorithm

Training Wrist Extensor Function and Detecting Unwanted Movement Strategies in an EMG-controlled Visuomotor Task.

Experimental research on trajectory-following of human multi-joint motion with fns

Artificially Induced Joint Movement Control with Musculoskeletal Model-Integrated Iterative Learning Algorithm

Intelligent Algorithm Tuning PID Method of Function Electrical Stimulation Using Knee Joint Angle

A Real-time Semg-Based Control Strategy and System for Contralaterally Controlled Functional Electrical Stimulation

Exploration of Hand Grasp Patterns Elicitable Through Non-Invasive Proximal Nerve Stimulation

A Co-driven Functional Electrical Stimulation Control Strategy by Dynamic Surface Electromyography and Joint Angle

Feedback Error Learning with Sliding Mode Control for Functional Electrical Stimulation: Elbow Joint Simulation

Iterative Learning Control Based on Radial Basis Function Network for Exoskeleton Arm

Feedback Control to a Static Target Angle in the Middle Finger Metacarpophalangeal Joint Using Functional Electrical Stimulation

Using in Vivo Subject-Specific Musculotendon Parameters to Investigate Control Strategy Changes after Stroke: an Emg-Driven Model of Elbow Joint

A Simulation Study of Functional Electrical Stimulation for An Upper Limb Rehabilitation Robot using Iterative Learning Control (ILC) and Linear models

An IMU and EMG-Based Simultaneous and Proportional Control Strategy of 3-DOF Wrist and Hand Movements

CONTROLLING MANIPULATOR OFF-LINE USING ELECTROMYOGRAPHY SIGNALS