Abstract:The active imaging blue light high-speed three-dimensional digital image correlation (3D-DIC) system was combined with a transient aerodynamic heating system and random pulse excitation technology to establish a high-frequency thermal vibration optical test system capable of multi-temperature zone testing at 900 degrees C to accurately obtain the thermal modal parameters of thin-walled structures. The full-field temperature distribution of a novel honeycomb thin-walled composite structure (HTWCS) with pit defects under non-uniform temperature was accurately simulated through reinforcement learning. The first six modal frequencies of honeycomb thin-walled composite structure with pit defects at room temperature increased compared with the non-destructive honeycomb thin-walled composite structure, and the third and fourth modal shapes interchanged. An adaptive modal parameter identification method for full-field three-dimensional vibration measurements under high-temperature environments was developed by combining the successive multivariate variational mode decomposition (VMD) with the modal superposition method. This method can effectively identify close modes. The area ratio-based approach was used to evaluate the damping of the measured response. The finite element model (FEM) of the HTWCS with pit defects at different temperatures was updated using a multi-state step-by-step model updating method and the temperature-dependent material properties were established. The results showed that the introduction of a damping ratio improved the accuracy of the updated FEM of HTWCS with pit defects. The proposed technique is anticipated to provide an effective method for high-frequency thermal vibration optical measurement and modal identification of thin-walled structures under multi-temperature regions.

Analysis of the Dynamic Characteristics of Ice-Detector Probe

Testing System of Characteristics of Electrical Vibration Table

Study on Fluid-Solid Coupling Dynamic Characteristics of Large Wide-Frequency-range Underwater Vibration Tables

Numerical Simulation for Vibration of Interferometric Probein Wet Steam Flow Field

Temperature Compensation of Ice Detector

Modelling of received ultrasonic signals based on variable frequency analysis

Analytical Modeling for Probe Impedance Using Reflection and Transmission Theory in Eddy Current Testing

Characteristics Analysis and Electrical Parameters Identification of the Rotary Piezoelectric Vibrator of the Ultrasonic Actuator

The Analysis of the Dynamic Performance of the Probe in Contact Measurement

Dynamic Characteristics of an Elastic Structure with Thermal Effects

Theoretical Analysis and Experimental Study on the Characteristics of Microprobe Vibration

Modal Test and Analysis of Electronic Cabinet

Digital Simulation Model Design and Analysis of Piezoelectric Cantilever Beam Smart Elements

Parametric analysis and response simulation of self-excited ice-induced vibration of offshore platform structures

Modeling of Transmission Conductor Based on Two-node Isoparametric Truss Elements and Application for Ice-shedding Analysis

Research on the Influence of Geometric Structure Parameters of Eddy Current Testing Probe on Sensor Resolution

Research On The Sensing Performance Of The Tuning Fork-Probe As A Micro Interaction Sensor

Modeling and optimization of tuning fork densitometer detector based on velocity comprehensive evaluation index

Embedded Ultrasonic Inspection on the Mechanical Properties of Cold Region Ice under Varying Temperatures

Measurement of Dynamic Properties of Sensitive Elements in Uncooled IR Imaging Systems

Adaptive Modal Identification of Honeycomb Thin-Walled Composite Structures with Pit Defects under Thermal Modal Testing Using Variational Mode Decomposition Technique Based on Digital Image Correlation