Abstract:Purpose This paper aims to explore the influence of corrosion-deformation interactions (CDI) on the corrosion behavior and mechanisms of 316LN under applied tensile stresses. Design/methodology/approach Corrosion of metals would be aggravated by CDI under applied stress. Notably, the presence of nitrogen in 316LN austenitic stainless steel (SS) would enhance the corrosion resistance compared to the nitrogen-absent 316L SS. To clarify the CDI behaviors, electrochemical corrosion experiments were performed on 316LN specimens under different applied stress levels. Complementary analyses, including three-dimensional morphological examinations by KH-7700 digital microscope and scanning electron microscopy coupled with energy dispersive spectroscopy, were conducted to investigate the macroscopic and microscopic corrosion morphology and to characterize the composition of corrosion products within pits. Furthermore, ion chromatography was used to analyze the solution composition variations after immersion corrosion tests of 316LN in a 6 wt.% FeCl 3 solution compared to original FeCl 3 solution. Electrochemical experiment results revealed the linear decrease in free corrosion potential with increasing applied stress. Electrochemical impedance spectroscopy results indicated that high tensile stress level damaged the integrity of passivation film, as evidenced by the remarkable reduction in electrochemical impedance. Ion chromatography analyses proved the concentrations increase of NO 3 − and NH 4 + ion concentrations in the corrosion media after corrosion tests. Findings The enhanced corrosion resistance of 316LN SS is attributable to the presence of nitrogen. Research limitations/implications The scope of this study is confined to the influence of tensile stress on the electrochemical corrosion of 316LN at ambient temperatures; it does not encompass the potential effects of elevated temperatures or compressive stress. Practical implications The resistance to stress electrochemical corrosion in SS may be enhanced through nitrogen alloying. Originality/value This paper presents a systematic investigation into the stress electrochemical corrosion of 316LN, marking the inaugural study of its impact on corrosion behaviors and underlying mechanisms.

Intergranular Corrosion of 316LN Stainless Steel Welded Joints

Study on High-Temperature Naphthenic Acid Corrosion of Type 304 and Type 316L Stainless Steel and Their Welded Joints

Research on intergranular corrosion of welded j oint of nuclear-grade austenitic stainless steel

Corrosion Behavior of 16mnr Steel and Welded Joints in High-Temperature Naphthenic Acid

Effect of Welding on Corrosion Behavior of 304SS Steel

Effect of nitrogen content on grain boundary engineering and corrosion resistance of 316LN stainless steel

Electrochemical Analysis on Intergranular Corrosion of Austenitic Stainless Steel Weld in Molten Nitrate Salt

Comparative studies on microstructure evolution and corrosion resistance of 304 and a newly developed high Mn and N austenitic stainless steel welded joints

Investigations on corrosion behavior of 316LN and 316L austenitic stainless steel under corrosion-deformation interactions

Pitting Corrosion Resistance of Welded Joints of a Super-duplex Stainless Steel by Electrochemical Characteristics Analysis

Effects of Nitrogen Element on Microstructure and Pitting Corrosion Resistance of Duplex Stainless Steel Welded Joints

Effect of nitrogen content on microstructure, mechanical properties, and corrosion behaviour of coarse-grained heat-affected zone of nitrogen-containing austenitic stainless steel

Effect of inhomogeneous microstructure on the stress corrosion cracking behavior of 316LN stainless steel weld joint under high-temperature and high-pressure water small punch test

Effect of ferrite and grain boundary characteristics on corrosion properties of thermal simulated 316 L heat affected zone

Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates

Investigations on microstructural characteristics and mechanical properties of 316 L stainless steel welded joints using nickel coated filler material by gas tungsten arc welding

Corrosion Behavior of High-Nitrogen Steel Hybrid Welded Joints Fabricated by Hybrid Laser-Arc Welding

Corrosion behaviour of 316L stainless steel and anti-corrosion materials in a high acidified chloride solution

Influencing mechanisms of C content and aging treatment on intergranular corrosion sensitivity of 316 stainless steel weld metals

Microstructural characteristics of different heat-affected zones in welded joints of UNS S32304 duplex stainless steel using the GMAW process: analysis of the pitting corrosion resistance

Mechanistic understanding of the localized corrosion behavior of laser powder bed fused 316L stainless steel in pressurized water reactor primary water