Abstract:Stainless steel 316L alloy with a complete austenite phase was manufactured using the Laser Engineered Net Shaping (LENS) technique. The microstructure of LENS-316L from the sub-millimeter to nanometer domains was analyzed using multi-scale characterization methods. The dynamic behavior of LENS-316L was studied by the Split Hopkinson Pressure Bar (SHPB) test. In this study, the dominating strengthening mechanism of the microstructure in LENS-316L was the dislocation strengthening mechanism, providing approximately 153 MPa. The molten pool deforms significantly after the material was dynamically compressed. When the strain rate reached 5000 s −1 , the material exhibited an adiabatic shear phenomenon and formed adiabatic shear bands. The width of the shear band decreased with the increase in the strain rate. When the strain rate increases from 3000 s −1 to 4000 s −1 , the dislocation density increases, the number of twins increases, and the twin thickness decreases. The effect of varying strain rates (3000, 4000, 5000, 6000 s −1 ) and varying temperatures (20, 150, 272, 450, 620 °C), on the stress–strain curves of the material were studied through the SHPB test. Additionally, the traditional Johnson–Cook (JC) constitutive model was modified. The modified constitutive model considers the effects of the strain rate and temperature softening coefficients in the strain hardening stage to predict the mechanical behavior of LENS-316L at high temperature and strain rates. Model predictions were in agreement with the experimental data. This study provides important insights for applying the LENS-316L complex construction in a dynamic load impact environment.

Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates

Effect of Cooling Rate on Solidification Microstructures in AISI 304 Stainless Steel

Formation Mechanism and Structure Evolution of Austenitic Stainless Steel 304 during Solidification with Near-Rapid Rates

Processing map and dynamic recrystallization behaviours of 316LN-Mn austenitic stainless steel

Microstructure evolution in AISI 304 stainless steel during near rapid directional solidification

Effects of Different Forging Processes on Microstructure Evolution for 316LN Austenitic Stainless Steel

Influences of Cooling Rates on Solidification and Segregation Characteristics of Fe-Cr-Ni-Mo-N Super Austenitic Stainless Steel

Influences of cooling rates on delta ferrite of nuclear power 316H austenitic stainless steel

The Effect of Annealing on the Microstructural Evolution and Mechanical Properties in Phase Reversed 316LN Austenitic Stainless Steel

In situ observation of the austenite to ferrite transformation in low-carbon steels from different initial phases at defined cooling rates

Microstructure Formation in Rapidly Solidified AISI 304 Stainless Steel Strip

Mechanical properties and microstructure evolution of additive manufactured 316L stainless steel under dynamic loading

In Situ Observation and Phase-Field Simulation Framework of Duplex Stainless-Steel Slab during Solidification

Effect of Cooling Rates on the Local—Overall Morphology Characteristics of Solidification Structure at Different Stages for High Carbon Steel

Effect of Cooling Rate on Microstructure and Mechanical Properties of a Microlaminated Low-Density Steel

Solidification microstructure and residual stress correlations in direct energy deposited type 316L stainless steel

A Comparison of Solidification Structures and Submicroscale Cellular Segregation in Rapidly Solidified Stainless Steels Produced via Two-Piston Splat Quenching and Laser Powder Bed Fusion

Microstructure evolution and dynamic recrystallization mechanisms of 316L stainless steel during hot deformation

Microstructure Selection of Fe–Cr–Ni Alloy During Directional Solidification

Cryogenic Work-Hardening Behavior for a Metastable Austenitic Stainless Steel at Liquid Nitrogen Temperature

Microstructural study of additively-manufactured carbon steel-stainless steel 316L - Inconel 625 functionally graded material: Simulation and experimental approaches