Abstract:A series of tung oil mixture used in urea coating were prepared by changing the content of P resin and inorganic conditioner in the mixtures.The viscosity,viscosity index and temperature sensitivity of the viscosity for these mixtures were measured using a rotational rheometer.The effects of several factors on viscosity,such as composition of the mixture and shearing rate,were investigated in detail.The results show that there is a negative deviation comparing with the linearity plus relationship for the viscosity of the mixture prepared with tung oil and P resin.When the content of P resin is about 30%,the viscosity of the mixture is minimum.For theviscosity of the mixture tung oil and inorganic conditioner increases as the increase in content of inorganic conditioner in mixture.When the content of inorganic conditioner is smaller than 25%,the viscosity of the mixture is smaller than 500 ?mPa·s,When the content of inorganic conditioner is up to 50%,the iscosity of the mixture may overtake 10~3?mPa·s.The viscosity index of the mixture decreases as the increase in content of inorganic conditioner in mixture.The temperature sensitivity index of viscosity increases when the inorganic conditioner is introduced into the mixture.The viscosity of tung oil and the mixture of tung oil and P resin((1∶1)) keep nearly unchangable when the shearing rate increases.Howerer,the viscosity of the mixture of tung oil and inorganic conditioner drops remarkably when the shearing rate increases.

Studies on the Urea Coated with Tung Oil As Coating Materials (Ⅰ) Study on the Coating Materials by FTIR and the Coupling of DTA - TGA

Studies on the Urea Coated with Tung Oil As Coating Materials(ii)study on the Rheological Behavior of Tung Mixture

Release features and surface topography of coated urea with rosin and tung oil as film-forming materials

Structure Characterization of Films from Drying Oils Cured under Infrared Light

Study on the Surface and Interface Morphological Microstructure of Tung Oil-Coated Fertilizers by SEM

Water-soluble UV Curable Urethane Methyl Acrylate Coating: Preparation and Properties

Study on Degradation Behavior of Tung Oil As Coating Material in Soil

Study on the characteristics of nutrient releasing of the coated urea with tung oil as controlling materials

Micro structure analysis of the coating of polyurethane coated urea during nitrogen release process

Study on Economic Benefits of Coated-Released Urea in Tobacco Production

Study on UV Curable Aqueous Polyurethane Coatings

Microstructure and Performance Analysis of Organic Coating under High Temperature and High CO 2 Partial Pressure

UV PHOTO-DEGRADATION OF COATINGS

Sprayable coating with poly(vinyl alcohol) modified metal–phenolic networks for slow‐release urea

Structure and properties of bio‐based polyurethane coatings for controlled‐release fertilizer

Effects of Ultrasonic Treatment on Properties of Polyurethane-Based Low Infrared Emissivity Coating

Flame retardancy and thermal degradation of cotton textiles based on UV-curable flame retardant coatings

Effect of Antimony Doped Tin Oxide on Behaviors of Waterborne Polyurethane Acrylate Nanocomposite Coatings

Improving the Performance of UV-curable Coatings with Carbon Nanomaterials

Drying characteristics, hygroscopicity, and dimensional stability of natural tung oil dried bamboo