Abstract:A new way in electron beam emittance measurement with Cerenkov radiation "double imaging" method is proposed in this paper. In the standard emittance measurements with optical diagnostics such as Cerenkov radiation, OTR (Optical Transition Radiation), fluorescence screen or BMP (beam profile monitor) etc., the emittance is indirectly calculated through quadrupole-scanning technique, with the prior ssumption that the beam phase space density distribution is ellipse, which will certainly induce systematic error when the beam profile is quite irregular or the space-charge effects can not be omitted. In proposed method, the Cerenkov radiation pass through a 1-meter focal-length thin convex lens, and a CCD camera is used to capture two images of Cerenkov radiation at the focal plane and at the image plane of the lens respectively. Then, with image processing technique, we acquire the angular divergence information of the electron beam from the image of the focal plane and the radial distribution information from the image of the image plane, which we call Cerenkov radiation "double imaging" method. Therefore, the emittance can be directly attained according to the definition of the RMS emittance. By this method, we can measure the actual phase space distributions without making any prior assumptions about the density distributions. Compared with other general measurements, this "double imaging" method has advantages of simpler equipment, higher precision and wider application. This paper also presents the computer simulation results of emittance measurement on the DC-SC ( DC-Superconducting) photocathode injector of PKU-SCAF (Peking University Superconducting Accelerator Facility) being built at Peking University.

Simulating Study on Systematic Errors in Measurements of High-Current Ion Beam Emittance with Slit-Wire Method

Analytical Calculation of the Measuring Error of an Electromagnetic Velocity Probe Caused by a Side Channel Wall

Development of an Emittance Measurement Unit for High-current Ion Beam

Measurement Techniques Of High-Current Ion Beam Emittance

Emittance Measurements of High-Current Pulse Ion Beam

Analysis of fringe field effects on measurement errors for Q-scanning-based emittance diagnosis system

An Emittance Measurement Device for a Space-Charge Dominated Electron Beam

Allison Scanner for High-Current Ion Beam Emittance Measurements

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Analysis of the Effects on Ultra-Short Laser Pulse Beam Quality Caused by Errors in Optical Systems

Calculation of the effect of slit size on emittance measurements made by a two-slit scanner

A New Measurement Of Electron Beam Emittance With Cerenkov Radiation "Double Imaging" Method

Multislit-Based Emittance Measurement of Electron Beam from a Photocathode Radio-Frequency Gun

A PROPOSAL FOR THE MEASUREMENT OF THE REAL EMITTANCE OF THE BEAM IN CYCLIC ACCELERATORS

Eliminating uncertainty of thermal emittance measurement in solenoid scans due to rf and solenoid fields overlap

Overestimation of Thermal Emittance in Solenoid Scans Due to Coupled Transverse Motion

Electron bunch slice emittance measurement with the space charge effects

Electrospray beam currents in the cone-jet mode based on numerical simulation.

Three methods for high density and high current electron beam brightness measurement

Analysis of errors in the evaluation of parallel transient hot wire measurements by means of line heat source fits

Slice emittance measurements using a slit-grid system and a fast wall-current monitor