Abstract:A three-dimensional wire-feeding model has been developed to study the transient coupling behaviour of heat and metal transfer, fluid flow, and solidified bead shape in wire plasma arc additive manufacturing (WPAAM). A novel surface heat source model considering the arc energy shading effect is proposed and adopted. An improved momentum source of the arc force considering the arc pressure shading effect is also developed and used. This model has been used to study the metal transfer dynamics, flow patterns, and bead shape of the WPAAM process with a wire-feeding speed (WFS) of 1–5 m/min. The simulated results agreed reasonably with the experimental data. As the WFS increased from 1 to 5 m/min, three different metal transfer modes were observed, which changed from globular droplet mode to droplet-liquid bridge mode and solid-liquid bridge mode. Detailed metal transfer information was analysed, including metal transfer position, shape, average temperature, and main driving force. The effects of the arc shading and metal transfer on the melt pool dynamics and bead shape were simulated and discussed. A periodic flow pattern of the melt pool produced by the metal transfer impact causes ripples or even humping defects. As the WFS increased, the melt pool depression gradually disappeared due to the arc pressure shading effect. When the WFS increased to 5 m/min, a temperature drop of about 140 K in the central melt pool, caused by the arc energy shading effect and cold metal transfer, weakened the lateral flow significantly, which explained the decrease of bead width at a large WFS. The results demonstrate that the developed wire-feeding model and findings could be used as a theoretical tool and basis to better understand the underlying physical mechanisms and achieve bead shape control in the WAAM process.

Adjustment of the Speed Fluctuation of Wire-feeder with Arc Spraying

Analysis of Drag of Wire-feeder System in Arc Spraying

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Automatic Feeder Design in Paper Honeycomb Parts Fixation System

Study on Wire Feeder System with H Bridge Circuit Based on SCM

Numerical studies of fluid dynamics in the flow field of a Two - Wire - Arc spray gun

Detection of Wire Feeding Speed and Its Influence on Rotating Arc Welding Quality

Studies of Computational Fluid Dynamics in the Flow Field of a High Velocity Wire Arc Spray Gun

Investigation on high productive wire arc spray system

ELECTRODE WIRE FEEDER FOR MIG/MAG AND TIG WELDING PROCESSES

Effect of Atomizing Gas Pressure on Coating Properties in Wire Arc Spraying

A High-Precision Constant Wire Tension Control System for Improving Workpiece Surface Quality and Geometric Accuracy in WEDM

Theoretical Analysis of Automatic Wire Connection by High Pressure Air for Horizontal Millers

Simulation and control of metal droplet transfer in bypass coupling wire arc additive manufacturing

A three-dimensional wire-feeding model for heat and metal transfer, fluid flow, and bead shape in wire plasma arc additive manufacturing

Effect of Different Wire Feeding Strategies on the Preparation of Functionally Graded Materials by Dual-Wire Arc Additive Manufacturing

Investigation of Arc Stability in Wire Arc Additive Manufacturing of 2319 Aluminum Alloy

Relationship between droplet transfer and forming quality in wire arc additive manufacturing of 2319 aluminum alloy

Numerical Study of the Plasma Region of High Velocity Wire-Arc Spray

Study on surface evenness of super-high-thickness cutting in high-speed wire electrical discharge machining

Analysis and Reduction of Process Energy Consumption and Thermal Deformation in a Micro-Structure Wire Electrode Electric Discharge Machining Thin-Wall Component