Abstract:The compatibilizing mechanism of PB‐g‐MAH‐co‐St and its effect on improving conductivity of PB/GNP composites. Using polymer‐grafts to improve the interfacial compatibilization of composites is by far the most common and effective strategy. However, although polybutene‐1 (PB) resin enjoys the reputation of "gold plastic" in the field of industry, there are few studies on its grafting and functional modification. In this work, PB‐grafts were prepared by melt grafting method with maleic anhydride (MAH) and styrene (St) as the functional monomers. The effect of two PB‐grafts (PB‐g‐MAH and PB‐g‐MAH‐co‐St) on the interfacial compatibilization of PB/GNP (Graphene nanosheet) thermally conductive composites was compared and the corresponding compatibilizing mechanism is discussed. Results indicate that PB‐g‐MAH‐co‐St has better compatibizing effect than that of PB‐g‐MAH because the cooperation of St with MAH enhanced the grafting degree of functional monomers on PB, and increased the surface energy of PB‐g‐MAH‐co‐St, which reduced the interface energy between PB and GNP and improved its interfacial adhesion. A better compatibilization effect has achieved when the compatibilizer and filler at the mass ratio of 1:4. Under this ratio, when the content of GNP is 30 wt%, the thermal conductivity and electrical conductivity of PB/GNP/ PB‐g‐MAH‐co‐St composite achieved 1.82 W·m−1·K−1 and 8.44 × 10−8 S·cm−1, which are 857.89% and 9 orders of magnitude higher than that of neat PB, respectively. Moreover, the composite has good mechanical properties and processability, which is beneficial to industrialization. Highlights PB‐g‐MAH‐co‐St has higher grafting ratio than that of PB‐g‐MAH. The surface energy of PB/GNP composites is reduced by use of PB‐g‐MAH‐co‐St. There is a suitable mass ratio between compatibilizer and filler. The composite of PB/GNP/PB‐g‐MAH‐co‐St achieved high thermal conductivity. The PB/GNP/PB‐g‐MAH‐co‐St composites have good melting processability.

A study on the compatibilization of graft-polypropylene used to polypropylene filled with hydroxyapatite

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Preparation and Characterization of Maleic Anhydride Compatibilized Poly(lactic acid)/Bamboo Particles Biocomposites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

The Preparation of Polyethylene/Collagen Composites by Using Reactive Compatibilization Process

Study on Compatibilization of New Melt Graft Copolymer on PP／PA6 Blend

Effect of Maleic‐anhydride‐grafted Polypropylene As a Compatibilizer on the Properties of Polypropylene/(modified Carbon Black) Composites

Compatibilizing Modification and Mechanism of PP/WF Composites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Graft PP Compatibilizing Modification of PP/PA6 Alloy

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends

Influence of Maleic Anhydride Grafted Polypropylene on the Dispersion of Clay in Polypropylene/Clay Nanocomposites

Preparation and characterization of maleic anhydride‐based double‐monomer grafted polylactic acid compatibilizer

A New Method for Preparing Anhydride Grafted Polypropylene with High Grafting Ratio by Combining Microwave Reaction and Reactive Extrusion

EFFECTS OF COMPATIBILIZERS ON SELECTED PROPERTIES OF HDPE COMPOSITES HIGHLY FILLED WITH BAMBOO FLOUR

Effect of compatibilization on the properties of in situ microfibrillar composites based on polylactic acid and polypropylene

STUDY ON FABRICATION AND SYNERGISTIC EFFECTS OF POLYPROPYLENE COMPOSITES FILLED WITH COMPOUND INORGANIC PARTICLES

Synthesis of multifunctional polypropylene via solid phase cografting and its grafting mechanism

Study on interfacial compatibilizing effect of PB grafts on PB/GNP thermally conductive composites

Synthesis of Multifunctional Polypropylene Via Solid Co-Grafting and the Mechanism Study.