Abstract:Summary Numerous technical papers have been published on the reservoir evaluation of tight sand gas in recent decades. It is believed that tight sand gas is characterized by low permeability, complex pore structure, abnormal pressure, and low gas saturation. Researchers have characterized tight gas in terms of, for example, statistics; and some of them are increasingly interested in the effect of fluid pressure and pore structure on gas saturation. However, there is still a lack of effective experimental and mechanism analysis. The focus of this paper is to investigate the effect of two factors on controlling the tight gas saturation. A method was proposed for determining the in-situ injection pressure of the DB 2 gas reservoir in the Kuqa area during the gas-accumulation period, and the result was 1.2 MPa. A polyetheretherketone carbon-fiber core holder (maximum temperature 180 °C, maximum confining pressure 30 MPa) was designed for the microcomputed-tomography (CT) simulation experiment. After that, four physical simulation experiments of different fluid pressures (0.1, 0.5, 1.5, and 5.0 MPa) were implemented using X-ray CT and the new core holder to study the effect of fluid pressure and pore structure on gas saturation. The results show that the fluid pressure and micropore connectivity are important factors for gas-saturation increase; the number of gas clusters (connected pores containing gas) increases with the increase of fluid pressure and the maximum volume of gas clusters increases with the increase of pore connectivity. The connected pores with the largest volume are an important source of gas-saturation contribution. The three types of modes (the blowing balloon mode, stitching mode, and composite mode) of microscopic gas-cluster formation are discussed. The blowing balloon mode is key to gas-saturation growth in the period of low fluid pressure or the early stage of the injection process. The stitching mode is key to gas-saturation growth in the period of high fluid pressure or the late stage of the injection process. The above research system investigates the quantitative control of fluid parameters (pressure) and reservoir parameters (pore structure) on gas saturation, which might change the situation where previous research was too focused on the pore-structure and fluid-pressure characterization, with a lack of quantitative control analysis of reservoir gas saturation. It provides a valuable reference and framework for the reader to conduct further quantitative research on tight gas saturation.

Parametric Influence Analyses for the Pressure-Holding Characteristics of Air-Cushion Fidelity Canister

Optimizing Preloading Pressure of Pre-Charged Gas for Isobaric Gas-Tight Hydrothermal Samplers

Study on the Pressure Retention Characteristic of a New Isobaric Water Sampler

A Long-stroke Pushing and Rotating Device for Seafloor Natural Gas Hydrate Pressure Core

A Long-distance Pushing and Rotary Equipment for Natural Gas Hydrate Pressure Core

Real Gas Effects on Charging and Discharging Processes of High Pressure Pneumatics

Study on Dynamic Pressure Effect of Gas Bearings in Fuel Cell Vehicles

Formation Kinetics and Morphology Characteristics of Fracture-Filling Natural Gas Hydrate under the Influence of Multiple Parameters

Research on pressure characteristic of pressure-retaining subsampling device of natural gas hydrate

Design and Performance Analysis of a Pressure Chamber for Simulation of Deep Sea Conditions

Numerical computation and experimental assessment of a pressure-retaining gas-tight sediment sampler

An optimization method of fidelity parameters of formation fluid sampling cylinder while drilling

Parametric analysis on multi-stage high pressure reducing valve for hydrogen decompression

Research on Pressure Tight Sampling Technique of Deep-Sea Shallow Sediment - A New Approach to Gas Hydrate Investigation

Design and Experimental Study of an Improved Pressure Core Sampler for Marine Gas Hydrates

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Research on deep sea microbe sampler pressure-retaining process

Structure Modify of High-pressure Chamber in Pressure-retaining Sampler for Deep-sea Sediment

Fluid-Structure Interaction Simulation and Visualization Experiments for Pressure-compensating Emitters

Numerical Investigation On The Gas Filling Process Of Hydrogen Air-Steam Mixtures In A Semi-Confined Experimental Pipe

Effect of Fluid Pressure and Pore Structure on Tight Sand Gas Saturation—Evidence from Micro-CT Simulation Experiment