Abstract:It is essential to understand the in-situ geomechanical properties of natural gas hydrate-bearing reservoirs for hydrate drilling, the design of reservoir stimulation and production schemes, geologic disaster prevention, and environmental impact assessment. In this way, it serves as the basis for the development and utilization of gas hydrate resources. In 2016, the Guangzhou Marine Geological Survey conducted the fourth natural gas hydrate drilling (Expedition GMGS4) in the north of the South China Sea, during which the effective stress of gas hydrate-bearing reservoirs in the study area was ascertained and gas hydrate-bearing pressure cores were collected. The effective stress was determined to be 700–800 kPa by in-situ piezocone penetration tests. The saturation, permeability, and shear strength of gas hydrates in the pressure core samples were measured under the in-situ stress state using the shipboard multi-sensor core logger (MSCL), pressure core analysis and transfer system (PCATS), and PCATS Triaxial system. Based on this, the distribution characteristics and the relationship of the permeability and gas hydrate saturation of the gas hydrate-bearing reservoirs were explored. Furthermore, the effects of effective stress and gas hydrate saturation on shear strength of gas hydrate-bearing clayey-silt sediments were mainly analyzed, as well as the stress–strain characteristics of gas hydrate-bearing sediments. The results are as follows: (i) the gas hydrate saturation and reservoir permeability in the study area are 0.7%–55% and 10−3–10−1mD, respectively, indicating low-permeability reservoirs; (ii) the gas hydrate saturation and reservoir permeability have obvious anisotropy in horizontal and vertical directions; (iii) the undrained shear strength of gas hydrate-bearing sediments is 0.24–0.52 MPa, and the shear strength of fine-grained sediments is more sensitive to the changes of in-situ stress. In the case that deviatoric stress continues increasing, micro-fractures may occur inside gas hydrate-bearing sediments, and this can lead to drastic changes in the strength of gas hydrate-bearing reservoirs. Therefore, it is necessary to take into account the effects of micro-fractures in gas hydrate-bearing reservoirs on engineering safety during long-term hydrate production.

Research on pressure characteristic of pressure-retaining subsampling device of natural gas hydrate

A Long-stroke Pushing and Rotating Device for Seafloor Natural Gas Hydrate Pressure Core

A Long-distance Pushing and Rotary Equipment for Natural Gas Hydrate Pressure Core

Research on Pressure‐stabilizing System for Transfer Device for Natural Gas Hydrate Cores

Optimizing Preloading Pressure of Pre-Charged Gas for Isobaric Gas-Tight Hydrothermal Samplers

Formation Kinetics and Morphology Characteristics of Fracture-Filling Natural Gas Hydrate under the Influence of Multiple Parameters

Study on the Pressure Retention Characteristic of a New Isobaric Water Sampler

Research and Analysis of 30-m Gravity Piston Corer for Natural Gas Hydrate

Parametric Influence Analyses for the Pressure-Holding Characteristics of Air-Cushion Fidelity Canister

Design and Experimental Study of an Improved Pressure Core Sampler for Marine Gas Hydrates

A pressure core ultrasonic test system for on-board analysis of gas hydrate-bearing sediments under in situ pressures

Development of Pressure Piston Corer for Exploring Natural Gas Hydrates

Non-Embedded Ultrasonic Detection for Pressure Cores of Natural Methane Hydrate-Bearing Sediments

Research on Pressure Tight Sampling Technique of Deep-Sea Shallow Sediment - A New Approach to Gas Hydrate Investigation

Development of One Pressure Core Transfer Device for One Long Gravity-Piston Pressure-Retained Corer

Pressure Tight Piston Corer—A New Approach on Gas Hydrate Investigation

Numerical Simulation of the Effect of Porous Media Permeability on the Decomposition Characteristics of Natural Gas Hydrate at the Core Scale

Geomechanical properties of gas hydrate-bearing sediments in Shenhu Area of the South China Sea

A hydrate reservoir renovation device and its application in nitrogen bubble fracturing

Numerical computation and experimental assessment of a pressure-retaining gas-tight sediment sampler

Investigation of the impact of threshold pressure gradient on gas production from hydrate deposits