Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

The Test of Low Cycle Fatigue Characteristics for 45CrNiMoVA Steel and In-situ Observation on Surface Crack Propagation

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Fatigue hardening/softening behaviour investigated through Vickers microhardness measurement during high-cycle fatigue

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Very High Cycle Fatigue Behavior of 25cr2ni2mov Steel Welded Joint

Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime

In-situ investigation of fatigue crack growth behavior of 34CrNi3Mo high-strength steel

Influence of microstructure and microdefects on long-term fatigue behavior of a Cr-Mo-V steel

Microstructure evolution and very-high-cycle fatigue crack initiation behavior of a structural steel with two loading intermittence modes

INITIATION AND PROPAGATION OF FATIGUE CRACK INEDGE REGION OF HOLE IN A SHEET WITH CENTRAL HOLE

Research on Microstructure Dependence of Near-Threshold Fatigue Crack Propagation by Combined Analyses of Fracture Surface and Fatigue Crack Growth Path

Gigacycle Fatigue Behaviors of Two Sncm439 Steels with Different Tensile Strengths

An Experimental Study for Low-Cycle Fatigue Crack Propagation of Glidcop Al-15

Ultra-high Cycle Fatigue Fracture Mechanism of a Precipitation HardeningStainless Steel at Different Stress Ratios

A fatigue life prediction approach to interior cracking induced high cycle and very high cycle fatigue for surface‐carburized steels

Improvement of Stress Corrosion Cracking Resistance by Low Cycle Fatigue of a CrNiMoV Steel

A Comparative Study on the Cyclic Plasticity and Fatigue Failure Behavior of Different Subzones in CrNiMoV Steel Welded Joint

Low Cycle Fatigue Damage Evolution & Life Estimate of 10CrMo910 Steel

Experimental and Numerical Studies on Fatigue Crack Propagation of Surface Cracks in Heat-Resistant Steel CrMoCoV Considering Closure Effect

Low-Cycle Fatigue Behavior and Fracture Mechanism of HS80H Steel at Different Strain Amplitudes and Mean Strains

High-Cycle, Low-Cycle, Extremely Low-Cycle Fatigue and Monotonic Fracture Behaviors of Low-Carbon Steel and Its Welded Joint