Abstract:Visible light communication (VLC) has been emerged as a complementary promising technology to its radio-frequency (RF) counterpart due to its considerable merits, such as safety to human beings, wide spectrum without license and non-interference to RF communication. In VLC, white LEDs, consisting of red-green-blue (RGB) and phosphor-converted LEDs, are usually utilized to facilitate both data transmission and illumination, where RGB LEDs are preferred to support higher data rate communications. In RGB LEDs, the mixing ratio of the red, green and blue lights is flexible in the chromaticity diagram. As long as the alternation of mixing ratio lies in a MacAdam ellipse or the speed of the alternation is fast enough, the variations of emitted white light cannot be perceived by human beings. Therefore, additional information can be carried by different mixing ratio and index modulation technique is introduced firstly in RGB-LED-based VLC wireless systems in order to enhance either spectral or energy efficiency. Different from the state-of-the-art methods, the index modulation is performed in the chromaticity domain rather than the traditional frequency, spatial and time domains, which provides a new perspective of index modulation. More specifically, in the proposed chromaticity-domain index modulation (CD-IM) with white RGB LEDs, the input bits are divided into subblocks, including index bits and data bits. The index bits are used to select different mixing ratio, which are corresponding to different direct current (DC) bias of RGB channels. The data bits are further split into three parts for the pulse amplitude modulation (PAM) on each color channel independently. The generated individual alternating current (AC) is then added to its corresponding DC current of each color channel. Since DC and AC currents could convey the information concurrently, the spectral efficiency could be improved considerably. At the receiver, a maximum likelihood (ML) detector is employed to detect the index bits as well as the data bits on the RGB channels simultaneously. Simulation results illustrate that our proposed CD-IM achieves better BER performance in comparison with its traditional color shift keying (CSK) and PAM counterparts under the same spectral efficiency.

Simulation Study Modulation Technology Based on RGB LED

Implement of Multiple Pulse Position Modulation with CPLD

A Ppm-Based Four-Dimensional Modulation Scheme For Visible Light Communications

An Enhanced 2-D Color Space Diversity Using RGB-LED Overlapping for Optical Camera Communication

Experimental demonstration of a RGB-LED based visible light communication system employing Carrierless Amplitude and Phase modulation

Enhancement of Led Indoor Communications Using Oppm-Pwm Modulation and Grouped Bit-Flipping Decoding

A Chromatic Aberration Correction Method for RGB LED Based on PWM

Chromaticity-domain Index Modulation for Visible Light Communication

A modulation scheme based on LED communication

A RGB LED PAM-4 Visible Light Communication Transmitter Based on a System Design with Equalization

Joint Modulation Techniques Based on Multicolor LEDs

Spaced Color Shift Keying Modulation for Camera-Based Visible Light Communication System Using Rolling Shutter Effect

Analysis and Optimization of P-LDPC Coded RGB-LED-Based VLC Systems

Study on Color Rendering of Light Communication Source Based on Multi-Chromatic LED

Study On The Influence Of Led Pn Junction Area On Modulation Bandwidth In Visible Light Communication

The Color Shift Key Modulation with Non-Uniform Signaling for Visible Light Communication

Design of Digital Pulse-Position Modulation System

A Color Compensation Method for Three Primary-color LED Light Sources

Pulse position and shape modulation for visible light communication system

A High-Speed Bi-Directional Visible Light Communication System Based on RGB-LED

ARM-Based Indoor RGB-LED Visible Light Communication System