Abstract:Traditional light sources were required to provide stable and uniform illumination for a living or working environment considering performance of visual function of human being. The requirement was always reasonable until non-visual functions of the ganglion cells in the retina photosensitive layer were found. New generation of lighting technology, however, is emerging based on novel lighting materials such as LED and photobiological effects on human physiology and behavior.To realize dynamic lighting of LED whose intensity and color were adjustable to the need of photobiological effects, a quantitative dimming method based on Pulse Width Modulation (PWM) and light-mixing technology was presented. Beginning with two channels' PWM, this paper demonstrated the determinacy and limitation of PWM dimming for realizing Expected Photometric and Colorimetric Quantities (EPCQ), in accordance with the analysis on geometrical, photometric, colorimetric and electrodynamic constraints. A quantitative model which mapped the EPCQ into duty cycles was finally established. The deduced model suggested that the determinacy was a unique individuality only for two channels' and three channels' PWM, but the limitation was an inevitable commonness for multiple channels'. To examine the model, a light-mixing experiment with two kinds of white LED simulated variations of illuminance and Correlation Color Temperature (CCT) from dawn to midday. Mean deviations between theoretical values and measured values were obtained, which were 15lx and 23K respectively. Result shows that this method can effectively realize the light spectrum which has a specific requirement of EPCQ, and provides a theoretical basis and a practical way for dynamic lighting of LED.

A Color Compensation Method for Three Primary-color LED Light Sources

A Chromatic Aberration Correction Method for RGB LED Based on PWM

Study On Chromaticity Balance For Led Exposure System

Optical design for uniform color mixing illumination system

A Color-Theory-Based Chromaticity Coordinates Tracking Strategy for LED Color-Mixing System

Rgbw Led Mixing Temperature Compensation Method with High Output Consistency

Research on LED Temperature Spectral Compensation Based on Visual and Non-Visual Effects

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

A High-precision Automated Calibration Method for LED Color Parameters

Constrained Optimization Of Multi-Color Led Light Sources For Color Temperature Control

The Color Matching of White LEDs Based on Two/Three Prinary Colors and Phosphor Converted

Comparative evaluation of color reproduction ability and energy efficiency between different wide-color-gamut LED display approaches

An Intelligent Calibration Method for Multi-object Color Consistency

Study on Method of Adjusting Color Temperature Continuously Based on Three Primary Lighting Sources

Wavelength Dependence of Colorimetric Properties of Lighting Sources Based on Multi-Color LEDs

Spectral Optimization of Three-Primary LEDs by Considering the Circadian Action Factor

The Color Temperature Adjusting Method for Multi-Primary Display Using Nonlinear Programming Problems

Research on Color Matching of LED Backlight for Large-Color-gamut LCD Application

Design of Optocoupler for Synthesizing Four Color Spectra

An LED Color Control System with Independently Changeable Illuminance

A Quantitative Dimming Method for LED Based on PWM