Abstract:Recent years have witnessed the rapid development of visible light communications (VLC) for next-generation wireless applications due to its wider bandwidth, higher security, and better electromagnetic immunity compared with conventional radio frequency (RF) microwaves. Although state-of-the-art VLC systems can achieve Gbps data rates by employing equalization schemes, designing a general low-complexity VLC transmitter with hundreds of MHz 3-dB bandwidth is still challenging due to the narrow modulation bandwidth nature of light emitting diodes (LEDs). In this paper, we first present a second-order equivalent circuit model for the LED, based on which we propose a general second-order equalizer (GSE) with low complexities, consisting of less than 5 passive capacitors, inductors, and resistors. We show that the GSE can enlarge the LED transmitter’s bandwidth to a few hundred MHz. To validate our GSE, we build a broadband VLC transmitter using commercial-off-the-shelf (COTS) red LED, whose bandwidth is 7 MHz. Experimental results show that our proposed GSE can extend the transmitter’s 3-dB bandwidth from 7 MHz to 546 MHz. Furthermore, we demonstrate that our proposed GSE transmitter in a VLC system can achieve 400 Mbps data rates at a distance of 250 cm with a bit error ratio (BER) below the forward error correction (FEC) limit 3.8×10 −3 , by employing non-return to zero on-off keying (NRZ-OOK) modulations. Going forward, to demonstrate the feasibility of our GSE transmitter in practical IEEE 802.11bb systems, we will combine the GSE transmitter with a 320 MHz WiFi board to test its performance with high-order OFDM modulations.

A RGB LED PAM-4 Visible Light Communication Transmitter Based on a System Design with Equalization

A 75-Mb/s RGB PAM-4 Visible Light Communication Transceiver System With Pre- and Post-Equalization

4.5-Gb/s RGB-LED based WDM visible light communication system employing CAP modulation and RLS based adaptive equalization

45-Gb/s RGB-LED Based WDM Visible Light Communication System Employing CAP Modulation and RLS Based Adaptive Equalization

A Novel Scalar MCMMA Blind Equalization Utilized in 8-PAM LED Based Visible Light Communication System

Design and Implementation of Low-Complexity Pre-Equalizer for 1.5 GHz VLC System

3.25-Gbps Visible Light Communication System Based on Single Carrier Frequency Domain Equalization Utilizing an RGB LED.

750 Mb/S Monochromatic Led-Based Real-Time Visible Light Communication System Employing A Low-Complexity Cascaded Post-Equalizer

Demonstration of 575-Mb/s Downlink and 225-Mb/s Uplink Bi-Directional SCM-WDM Visible Light Communication Using RGB LED and Phosphor-Based LED

Application of Digital Signal Processing in High Speed Visible Light Communication System

A Real-Time High-Speed Visible Light Communication System Based on RGB-LEDs

2 Gb/s &Amp;#x03bc;led-Apd Based Visible Light Communications Using Feed-Forward Pre-Equalization and PAM-4 Modulation

Ultra-high-speed Single Red–green–blue Light-Emitting Diode-Based Visible Light Communication System Utilizing Advanced Modulation Formats

ARM-Based Indoor RGB-LED Visible Light Communication System

High speed visible light communication based on hardware preequalization circuit

A Cost-Efficient RGB Laser-Based Visible Light Communication System by Incorporating Hybrid Wavelength and Polarization Division Multiplexing Schemes

Performance Comparison of OFDM Signal and CAP Signal over High Capacity RGB-LED-Based WDM Visible Light Communication

Wireless Visible Light Communications Employing Feed-Forward Pre-Equalization and PAM-4 Modulation

A High-Speed Bi-Directional Visible Light Communication System Based on RGB-LED

Implementation of a Low-Complexity Pre-Equalizer for Visible Light Communications