Abstract:Recent years have witnessed the rapid development of visible light communications (VLC) for next-generation wireless applications due to its wider bandwidth, higher security, and better electromagnetic immunity compared with conventional radio frequency (RF) microwaves. Although state-of-the-art VLC systems can achieve Gbps data rates by employing equalization schemes, designing a general low-complexity VLC transmitter with hundreds of MHz 3-dB bandwidth is still challenging due to the narrow modulation bandwidth nature of light emitting diodes (LEDs). In this paper, we first present a second-order equivalent circuit model for the LED, based on which we propose a general second-order equalizer (GSE) with low complexities, consisting of less than 5 passive capacitors, inductors, and resistors. We show that the GSE can enlarge the LED transmitter’s bandwidth to a few hundred MHz. To validate our GSE, we build a broadband VLC transmitter using commercial-off-the-shelf (COTS) red LED, whose bandwidth is 7 MHz. Experimental results show that our proposed GSE can extend the transmitter’s 3-dB bandwidth from 7 MHz to 546 MHz. Furthermore, we demonstrate that our proposed GSE transmitter in a VLC system can achieve 400 Mbps data rates at a distance of 250 cm with a bit error ratio (BER) below the forward error correction (FEC) limit 3.8×10 −3 , by employing non-return to zero on-off keying (NRZ-OOK) modulations. Going forward, to demonstrate the feasibility of our GSE transmitter in practical IEEE 802.11bb systems, we will combine the GSE transmitter with a 320 MHz WiFi board to test its performance with high-order OFDM modulations.

Wireless Visible Light Communications Employing Feed-Forward Pre-Equalization and PAM-4 Modulation

2 Gb/s &Amp;#x03bc;led-Apd Based Visible Light Communications Using Feed-Forward Pre-Equalization and PAM-4 Modulation

Research data supporting" Wireless Visible Light Communications Employing Feed Forward Pre Equalization and PAM 4 Modulation"

750 Mb/S Monochromatic Led-Based Real-Time Visible Light Communication System Employing A Low-Complexity Cascaded Post-Equalizer

A Novel Scalar MCMMA Blind Equalization Utilized in 8-PAM LED Based Visible Light Communication System

1.2 Gbit/S Visible Light Transmission Based on Orthogonal Frequency-Division Multiplexing Using A Phosphorescent White Light-Emitting Diode and A Pre-Equalization Circuit

A 75-Mb/s RGB PAM-4 Visible Light Communication Transceiver System With Pre- and Post-Equalization

Proposal of a Pre-equalizer with Nyquist Filtering to Mitigate LED Nonlinearity in PAM-4 VLC Systems

A Gb/s VLC Transmission Using Hardware Preequalization Circuit

High Speed Visible Light Communication Based on Pulse Amplitude Modulation

Maximization of Visible Light Communication Capacity Employing Quasi-Linear Preequalization with Peak Power Limitation

Enabling Technologies for High-Speed Visible Light Communication Employing CAP Modulation

Parallel Mini/Micro-LEDs Transmitter: Size-Dependent Effect and Gbps Multi-User Visible Light Communication

Implementation of a Low-Complexity Pre-Equalizer for Visible Light Communications

Bandwidth-efficient Visible Light Communication System Based on Faster-Than-nyquist Pre-Coded CAP Modulation

1.6 Gbit/s phosphorescent white LED based VLC transmission using a cascaded pre-equalization circuit and a differential outputs PIN receiver.

Spectrally Efficient Multi-Band Visible Light Communication System Based on Nyquist PAM-8 Modulation

High speed visible light communication based on hardware preequalization circuit

3375-Gb/s RGB-LED Based WDM Visible Light Communication System Employing PAM-8 Modulation with Phase Shifted Manchester Coding

4.5-Gb/s RGB-LED based WDM visible light communication system employing CAP modulation and RLS based adaptive equalization

Bandwidth enhancement with DAC-enabled pre-equalization and real-valued precoding for a FBMC-VLC