Abstract:The increasing demand for renewable energy highlights the need for efficient energy storage solutions. Despite various available technologies, lead‐acid batteries remain preferred for many industrial applications due to their inherent advantages. However, their expanded use necessitates proper waste management and recycling practices. During lead‐acid battery recycling, Na2SO4 is generated as a waste product, which cannot be directly sold due to quality concerns and limited market demand. Consequently, advanced waste management techniques are required to comply with government regulations on industrial waste disposal. Despite these challenges, Na2SO4 serves as a vital precursor for producing K2SO4, a valuable fertilizer. Prior research on the glaserite process for converting Na2SO4 to K2SO4 has assumed Na2SO4 to be pure—without traces of impurities. However, Na2SO4 recovered from battery recycling contains various contaminants. To address this, HSC Chemistry software was used to model K2SO4 and NaCl production from impure Na2SO4 and KCl, considering feed impurities. Under ideal conditions—a 1 bar pressure, 25°C feed temperature, and 40°C reactor temperature—over 90% yield of K2SO4 and NaCl was achieved in the absence of impurities. However, the addition of impurities resulted in a reduction in yields. Notably, impurity levels ranging from 1% to 4% by weight still allowed for yields exceeding 90%. Furthermore, a review of reactor compositions revealed a significant depletion of potassium and chlorine ions which are crucial for K2SO4 and NaCl production as impurity levels varied from 0% to 10%. These findings emphasize the negative impact of impurities on K2SO4 and NaCl yields.

Conversion of Potassium Chloride into Potassium Sulfate by Four-Compartment Electrodialysis: Batch Operation Process

Modeling of Potassium Sulfate Production from Potassium Chloride by Electrodialytic Ion Substitution

High-value conversion of Na2SO4 wastewater by a continuous electrodialytic metathesis process: Effects of coexisting ions

Obtaining potassium sulphate by conversion of potassium chloride and ammonium sulphate

Reclamation of sulfate-laden wastewater via a hybrid selective nanofiltration and electrodialysis metathesis process

Pre-fractionation of potassium ions from brine/bittern by selective electrodialysis: Effect of crucial factors and its preliminary application

Production process for extracting potash fertilizer form low grade potassium mixed salt

Study on the Process of Potassium Sulfate Production from Lop Nur Salt Lake Brine Resource

Valorization of sodium sulfate waste to potassium sulfate fertilizer: experimental studies, process modeling, and optimization

Direct conversion of monopotassium L-aspartate by electrodialysis metathesis: Stack resistance, co-ion transport, and concentration polarization

Synchronously recovering different nutrient ions from wastewater by using selective electrodialysis

Application of electrodialysis to the production of Vitamin C

Application of Anti-Solvent Crystallization for High-Purity Potash Production from K-Feldspar Leaching Solution

Potassium sulphate production from an aqueous sodium sulphate from lead‐acid battery recycling: Impact of feedstock impurities on products yields

An electrodialysis-based coupling technique for simultaneous reclamation of waste acid and cleaner production of organic acid

Ion Injection Bipolar Membrane Electrodialysis Realizes over 8 Mol/l NaOH Conversion from a Brine Stream

Separation of Chloride and Sulfate Ions from Desulfurization Wastewater Using Monovalent Anions Selective Electrodialysis

Study on process conditions for the conversion of sodium p-toluenesulfonate by bipolar membrane electrodialysis

Modeling and simulation of continuous electrodialysis metathesis process for conversion of Na2SO4 to K2SO4

A single-step crystallization process to remove potassium from sodium aluminate solution