Abstract:Soda ash (Na2CO3) is produced using the traditional Solvay process. It entails the reaction of CO2 with high-salinity water in the presence of ammonia (NH3), which produces insoluble sodium bicarbonate (NaHCO3) and soluble ammonium chloride (NH4Cl). In the current work, a newly combined approach has been developed to effectively manage the removal of ammonia and sulfate from the effluent of the Solvay process. The devised technique centers on an electrochemical coagulation process, complemented with the utilization of calcium oxide (CaO) as a buffering reagent. This innovative approach excels at achieving high recovery rates for both ammonia and sulfate. The recovered ammonia holds the potential for recycling, thereby contributing to the sustainability of the Solvay process by reusing ammonia in its initial stages. Furthermore, sulfate ions are recuperated in the form of calcium sulfate, a value-added product boasting various industrial applications. The results gleaned from this study underscore the efficacy of the ammonia recovery process, particularly when operating at elevated current densities and with higher calcium oxide concentrations. On the other hand, sulfate recovery demonstrates superior performance when exposed to moderate current densities and limited calcium oxide concentrations. Consequently, the integration of both stages within a single, cohesive process necessitates the development of an optimization methodology to cater to varying operational conditions. To address this need, second-order polynomial equations were formulated and employed to anticipate ammonia and sulfate removal rates in the integrated approach. Four independent variables come into play: calcium oxide concentration, current density, temperature, and mixing rate. The findings reveal that most of these variables exert substantial influences on both ammonia and sulfate removal rates, underscoring the need for careful consideration and fine-tuning to optimize the overall process. The maximum ammonia and sulfate removal were found to reach 99.50% and 96.03%, respectively, at a calcium oxide concentration of 3.5 g/100 mL, a current density of 19.95 mA/cm2, a temperature of 35 °C, and a mixing rate of 0.76 R/s. The results are promising, and the developed process is also suitable for recovering high concentrations of sulfate and ammonia from various wastewater sources.

Reclamation of sulfate-laden wastewater via a hybrid selective nanofiltration and electrodialysis metathesis process

High-value conversion of Na2SO4 wastewater by a continuous electrodialytic metathesis process: Effects of coexisting ions

Hybrid Nanofiltration–membrane Crystallization System for the Treatment of Sulfate Wastes

Resourceful Treatment of Battery Recycling Wastewater Containing H2SO4 and NiSO4 by Diffusion Dialysis and Electrodialysis

Developing a reclamation strategy for softening nanofiltration brine: A scaling-free conversion approach via continuous two-stage electrodialysis metathesis

Synchronously recovering different nutrient ions from wastewater by using selective electrodialysis

Cost and exergy analysis on integrated process of electrodialysis metathesis - reverse osmosis - evaporation for producing K2SO4 from Na2SO4

Sustainable disposal of seawater brine by novel hybrid electrodialysis system: Fine utilization of mixed salts

Separation of Chloride and Sulfate Ions from Desulfurization Wastewater Using Monovalent Anions Selective Electrodialysis

Simultaneous Ion Fractionation and Concentration by Selectrodialysis for Saline Wastewater Valorization

Sustainable Treatment and Resource Recovery of Anion Exchange Spent Brine by Pilot-Scale Electrodialysis and Ultrafiltration.

Near-zero liquid discharge and reclamation process based on electrodialysis metathesis for high-salinity wastewater with high scaling potential

Enhanced separation of monovalent and divalent ions in high salinity wastewater by selective electrodialysis: Experimental investigation and performance prediction

Electrodialysis metathesis for high-value resource conversion and recovery: From sustainable applications to future prospects

Simultaneous Recovery of Ammonium and Phosphorus Via the Integration of Electrodialysis with Struvite Reactor

Evaluation of a Combined Approach for Sulfate and Ammonia Recovery from Treated Brine Using a Simultaneous Chemical Precipitation and Electrocoagulation Processes

Sustainable nutrient water recovery by a hybrid electrodialysis (ED) - forward osmosis (FO) process for agricultural application

A novel electrochemical process for the recovery and recycling of ferric chloride from precipitation sludge

Long-Term Robustness and Failure Mechanisms of Electrochemical Stripping for Wastewater Ammonia Recovery

Converting softening nanofiltration brine into high-solubility liquid salts (HSLS) via electrodialysis metathesis: Effect of membrane type

A Study on the Treatment and Recovery of Sodium Sulfate (Na 2 SO 4 ) Generated When Recovering Valuable Metals (Ni, Co, Mn, Li) from Waste Lithium Ion Batteries(LIBs)