Abstract:The Egyptian black sands contain several economic minerals, such as ilmenite, magnetite, garnet, zircon, rutile and monazite. During the concentration and separation of a high‐grade rutile concentrate a bulk magnetic fraction is obtained. This fraction is composed mainly of opaques, titanhematite, ilmenite–titanhematite exsolved intergrown grains, magnetic leucoxene in addition to chromite, and magnetic rutile. The magnetic rutile occupies 6 wt.% of the bulk magnetic fraction or approx. 4 wt.% of the original rutile content in the raw sands. Most of magnetic rutile crystals are contaminated with opaque inclusions, staining‐coating and/or composite locked grains. This magnetic rutile has a magnetic range from strongly paramagnetic to very weak paramagnetic. Electron microprobe analysis for twenty‐three magnetic rutile grains identified mineral components of rutile, titanhematite, pseudorutile, leached pseudorutile and ilmenite in decreasing order of abundance. Some other inclusions are also detected in the different magnetic rutile grains. They are most probably garnet, silica, amphibole, ilmenite, feldspar, mica and zircon. The presence of these inclusions reflect the derivation of magnetic rutile of various crystalline igneous and metamorphic rocks. The magnetic susceptibility of magnetic rutile depends on the associated mineral components and their relative volumes in comparison to the rutile mineral component. Magnetic susceptibility of magnetic rutile is also related to both type and size of the associated mineral inclusions. The average chemical composition of the magnetic rutile is 66.34 wt.% TiO2, 21.71 wt.% Fe2O3, 6.39 wt.% SiO2, 1.80 wt.% Al2O3, 1.19 wt.% CaO and 0.10 wt.% Cr2O3. Thus, the contamination of magnetic rutile in the non‐magnetic rutile concentrate would decrease the market value of the rutile concentrate. Alternatively these magnetic rutile grains are recommended to be blended with magnetic leucoxene or some types of ilmenite concentrate to improve the overall marketable specifications especially for both of Ti, Fe and Cr contents.

A Processing Experimental Research of a Rutile Ore

Experiment on the Process of Iron Removal from Nepheline Syenite in Suizhou of Hubei

Gravity Separation Tests of a Complex Rutile Ore

Study on Mineral Processing of A Refractory Low Grade Ilmenite Ore

Fundamental Study on Utilization of Titanium Resources by RHF Process

Evaluation of the potential of recovering various valuable elements from a vanadiferous titanomagnetite tailing based on chemical and process mineralogical characterization

Comprehensive Recovery of Iron and Mica from Zhouyoufang Iron Tailings

Experimental Research on Purifying Quartz Ore from Kaolin in Hunan by Mineral Processing Method

Production of synthetic rutile from tin ore beneficiation byproduct through preoxidation and reductive leaching in hydrochloric acid

A process for producing synthetic rutile from Panzhihua titanium slag

Mineralogical Characteristics of the Separated Magnetic Rutile of the Egyptian Black Sands

Experimental Research on Beneficiation Process a Low-grade Cu-Pb-Zn Polymetallic Sulfide Ore from Xinjiang

Research on the process and mechanism of preparing titanium-rich materials from complex ilmenite

A Process Design for Improving the Recovery Effect of Cassiterite from a Tin Polymetallic Ore

Recovery of Xenotime and Florencite from Silicate Minerals Using a Combined Technique of Magnetic Separation and Flotation

Beneficiation of Unwieldy Oolitic Hematite by Deep Reduction and Magnetic Separation Process

The progress and some problems in the study of rutile in metamorphic rocks.

Experimental Study on Efficient Recovery of High-Grade Sulfide Ore

Discussions on formation mechanism of rutile deposit in eclogite of North Jiangsu

Research on the Process of Roasting Magnetic Separation-Acid Leaching for Oolitic Hematite Ore

Experimental Study on Comprehensive Recovery of Valuable Minerals from Flotation Tailings in Copper-Molybdenum Mine