Abstract:At present, the cyanide gold extraction process is still the main technology for gold production. Generated cyanide tailings containing highly toxic substances exhibit potential environmental risks. These tailings are in urgent need of purification treatment, especially after being classified as hazardous waste. In this study, the impacts of elution methods, operating time, tailings/water ratios, reagent types on the elution rates of cyanide were investigated. Furthermore, the composite elution method developed in this research was extended for engineering. Results showed that the optimum elution conditions were determined to be: stirring elution, tailings/water ratio (M/V; 1:1) and operating time (10-20 min). Besides, 4 reagents (sodium dodecyl benzene sulfonate, cyclodextrin, sodium silicate and calcium hydroxide) were selected from four categories of 21 reagents for further composite elution. The cyanide elution rate was the highest (90.7%±0.1%) while the molar ratio of these 4 reagents was 5:2:2:1. Moreover, the combination of reagent elution and positive pressure filtration improved the elution efficiency of cyanide (92.6%±0.8%). And the cyanide content in the toxic leaching solution was lower than the standard value (5.0 mg/L). Furthermore, the composite elution method developed in this study was also extended for engineering. The concentration of cyanide in the leachate was < 5.0 mg/L, and was stable during 189 days of detection. Notably, the effluent can be reused directly, or reused after further treatment. The zero discharge of effluents and solid wastes was realized in the processes. The above results provided supports for the engineering treatment of cyanide tailings.

Study on the Treatment of Cyanogenation Gold Extracting Wastewater by the Combined Ion Exchange-Magnetolectrolyze Process

Study on electroplating waste water treatment process

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

The Treatment of Cyanide from Gold Mine Effluent by a Novel Five-Compartment Electrodialysis

The progress of cyanide wastewater treatment with ion-exchange resins

Reagent Elution Combined with Positive Pressure Filtration: A Zero-Discharge Method for Cyanide Tailings Remediation

Research Progress in Treatment of Heavy Metal Wastewater Using the Hybrid Process of Complexation-Ultrafiltration-electrodeposition

Process For Wastewater Treatment Of Anion Exchange Fiber Preparation By Cleaning Production

Mechanism of Combination Membrane and Electro-Winning Process on Treatment and Remediation of Cu2+ Polluted Water Body

Advanced Treatment of Copper Smelting Wastewater by the Combination of Internal Micro-Electrolysis and Electrocoagulation

Electroplating waste water treatment method

Treatment of Copper Containing Wastewater Using Electrolysis and Electrodialysis Combination Technique

Studies on Treatment of Copper Pickling Wastewater with Electrode-Biomembrane Technique

Green Treatment of Cyanide Tailings Using a “filter Press BackWash–Chemical Precipitation–Gaseous Membrane Absorption” Method

Recovery of copper and water from copper-electroplating wastewater by the combination process of electrolysis and electrodialysis

Study on Electrodeposition Recovery of Heavy Metal in Complexation-Ultrafiltration Process

Research progress of cyanide-containing wastewater treatment

Electromagnetic Synergistic Treatment of High Salt and High Organic Wastewater

The study of direct gold electrowinning from dilute cyanide solutions

Study of Electroless Ni-P Process and Wastewater Treatment

Electrocoagulation: A Promising Method to Treat and Reuse Mineral Processing Wastewater with High COD