Abstract:Toothed gears are the most common mechanical gears in machine building, which are characterized by high reliability and durability, a constant transfer number, and which can transmit high torque. During toothed gear operation, the surfaces of the teeth slide, which gives rise to friction forces and wears their working surfaces. To prevent this, the surfaces of the teeth need constant lubrication. This paper considers the design of a gear tooth engagement, which does not have friction between the surfaces of the teeth since they roll over each other without slipping. The profile of the tooth of such a gear is outlined by congruent arcs, symmetrical relative to the line that connects the center of rotation of the toothed wheel with the top of the tooth. These symmetrical curves at the top of the tooth intersect at the predefined angle. In the depressions of the wheel, adjacent teeth also intersect at the same angle. Such a condition can be ensured by a curve that at all its points crosses the radius-vector emanating from the coordinate origin, also at a stable angle equal to half of the given one. This curve is a logarithmic spiral. If the number of teeth of the drive and driven wheels is the same, then their teeth are congruent. Otherwise, the profiles of the teeth would differ but they could be outlined by congruent arcs of the same logarithmic spiral of the same length taken from different areas of the curve. The minimum possible angle at the top of the teeth is straight. At acute angle, the toothed gear operation is impossible. To build gear wheels with a right angle at the top of the tooth, it would suffice to set the number of teeth of the drive and driven wheels. The center-to-center distance is calculated using the derived formula. The transfer number of such a gear is variable but, with an increase in the number of teeth, the range of its change decreases. The algorithm of wheel construction is given.

The Equation of Tooth Profile of Micro-segment Involute Gear

Study on Tooth Profile of Involute Conjugated Internal Gear for High-Pressure Internal Gear Pumps

Tooth Contact Analysis of Involute Gear

Numerical Computation of Tooth Profile of Noncircular Gear

Geometric design and analysis of face-gear drive with involute helical pinion

Tolerance Modeling of Involute Helical Gear Tooth Surface

Gearing Principle of Conical Involute Non-Circular Gear and Simulation Model

The Tooth Profile Design and Examination of Circular-Arc Gear Pump

Shaping the tooth profile of elliptical gear with the involute ellipse curve

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Research on Meshing Theory of Noninvolute Beveloid Gears

Optimization of cutter blade profile for face-hobbed spiral bevel gears

The Parametric Design of the External Transmission of Involute Beveloid Gear with Parallel Axes

Numerical computing method of noncircular gear tooth profiles generated by shaper cutters

Effects of pressure angle on uneven wear of a tooth profile of an elliptical gear generated by ellipse involute

Tooth Profile Generation and Analysis of Crowned Elliptical Gears

Simulation and optimization of computer numerical control-milling model for machining a spiral bevel gear with new tooth flank

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

An Analysis of the Kinematical Characteristics of an Eccentric Curve-Face Gear Pair with Compound Motion

Designing an outer toothed gear whose wheel teeth are outlined by the logarithmic spiral arcs

A modeling and tooth contact analysis method of parabolic modified face gear