Abstract:Alloy solidification is an important process to control the mechanical properties of engineering products. During solidification, dendrite fragmentation occurs commonly as a key phenomenon to determine the microstructure and to obtain fine grain size. Recently, in situ synchrotron X-radiography technique was developed and applied to observe thermodynamic behaviors such as dendrite growth and fragmentation during solidification. External forces such as mechanical and electromagnetic stirring, and thermal shock were added into the solidification process to investigate their effects on the fragmentation behavior. However, most work conducted in literature focused on qualitative aspects e.g. morphology transition or solute distribution and quantitative investigation such as determining the specific relationship between fragmentation and solidification conditions was rather limited. In this work, the third generation synchrotron X-radiography technique was used to observe the solidification process of an Al-15%Cu (mass fraction) alloy. Experimental conditions including the strength of the pulsed electromagnetic fields, dendrite growth direction and the temperature gradients were varied and the subsequent effect on fragmentation was studied and quantified. A computer program was developed based on Matlab to perform the image processing and measurement. The fragmentation number according to experiments was counted and correlated to the mushy zone depth and local solid fraction. Results showed that a stronger electromagnetic field, growing against gravity and growing at higher velocity would significantly increase the fragmentation number. Furthermore, the fragmentation number followed a Gauss distribution as a function of either mushy zone depth or local solid fraction, and the maximum fragmentation occurred when the-solid fraction was about 0.45. In the end the extent to which caused those statistic results above were analyzed as the necking process due to the velocity field, the cumulative solid due to the gravity field and the liquid flow due to the electromagnetic field.

Bubbles Evolution of Aluminum-calcium Alloy in Melting and Solidification Process

Observation of Bubble-Involving Spontaneous Gas Dissolution in Superheated Al Alloy Melt

Bubble Growth, Intermetallic Compounds Dissolution and Their Interactions During Heating of an Al-5wt.%Mn Alloy by In-Situ Synchrotron Radiography

In Situ Observation on Bubble Behavior of Solidifying Al-Ni Alloy under the Interference of Intermetallic Compounds

Growth Behaviors of Bubbles and Intermetallic Compounds in Solidifying Al-5 Wt.% Mn Alloy

Modeling of Microstructure Formation with Gas Porosity Growth During Columnar Dendritic Solidification of Aluminum Alloys

Synchrotron radiation X-ray imaging of cavitation bubbles in Al–Cu alloy melt

Direct Observation of the Segregation Driven by Bubble Evolution and Liquid Phase Separation in Al–10 Wt.% Bi Immiscible Alloy

In-situ Study on Hydrogen Bubble Evolution in the Liquid Al/solid Ni Interconnection by Synchrotron Radiation X-ray Radiography

Imaging of Structure Evolution in Solidifying Al–Bi Immiscible Alloys by Synchrotron Radiography

Morphological Evolution of the Interface Microstructure in the Presence of Bubbles During Directional Solidification

In Situ Study on the Nucleation, Growth Evolution, and Motion Behavior of Hydrogen Bubbles at the Liquid/Solid Bimetal Interface by Using Synchrotron Radiation X-Ray Imaging Technology

In Situ and Real-Time Observation of the Solidification Process of Al-20 Mass%Cu Alloy by Synchrotron X-Ray Radiography

QUANTIFICATION STUDY ON DENDRITE FRAGMENTATION IN SOLIDIFICATION PROCESS OF ALLUMINUM ALLOYS

Dynamic behaviors of minor droplets and the role of bubbles in phase-separating Al Bi immiscible alloy

Microstructure Evolution of Al-Si Semi-Solid Slurry by Gas Bubble Stirring Method

Simulation of gas porosity formation and interaction with dendrite and eutectic structures during solidification of Al-Si alloys

Observation of Bi Coarsening and Dissolution Behaviors in Melting Al–Bi Immiscible Alloy

Research on homogeneous nucleation and microstructure evolution of aluminium alloy melt

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

Dynamic evolution of polyhedral bubbles in Fe9Cr1.5W0.4Si F/M steel under 30keV H2+& He+ synergetic irradiation