Abstract:High performance engineering thermoplastics modified epoxy resins are novel materials avoiding the usual shortcomings of rubber modification (i.e., reduction of glass transition temperature, yield strength, and elastic modulus), and having improved impact strength and fracture toughness [1, 2]. Although the use of thermoplastic modifier has been important for the improvement of fracture toughness is a mechanical property high performance epoxy resins, there is limited information concerning the interfacial control between thermoplastic modifier and epoxy resins [3]. And in most cases, commercial thermoplastics are directly used as modifiers without effective control of the interface between the dispersed phase and the cured epoxy resin. There are two ways to improve the interfacial adhesion between the dispersed thermoplastics phase and the cured epoxy resin. The first is to chemically modify or functionalize the thermoplastics modifier. The second is to introduce mutual interaction, such as dipole-dipole interaction, hydrogen-bonding etc., into the curing system to improve the compatibility. Recent studies have shown that the interfacial adhesion between thermosets and thermoplastics can be dramatically improved when interdiffusion is possible [4]. Here, we prefer the second way since the development of functional polymers is still limited to the laboratory and it is a high cost process. This paper reports the incorporation effect of a second thermoplastics modifier (PC), on the phase separation behavior and morphology of PEI modified E-51 curing systems by using small angle laser light scattering (SALLS) and scanning electron microscopy (SEM, Hitachi S-570). The samples were made by incorporating various contents of polyetherimide (PEI; General Electric Co., USA) and polycarbonate (PC, based on bisphenonl-A; Idenitsu Kosan Co., Japan) into E-51 (a commercial grade epoxy resin based on diglycidyl ether of bisphenonl-A; Hangzhou Chemical Plant China) by weight. Then cured with 4,4 � diamino-diphenylsulphone (DDS; Chemical agent Co., China).

TOUGHENING OF POLYETHERIMIDE FOR CYANATE ESTER-EPOXY NOVOLAC RESIN BLENDS

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Polymerization Induced Phase Separation in Poly(ether Imide)-Modified Epoxy Resin Cured with Imidazole

Solvent Resistant Self-Crosslinked Poly(ether Imide)

Toughening tetrafunctional epoxy resins using polyetherimide

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Study on Toughening of Matrix Resins for Advanced Composite

Polyetherimide-modified bismaleimide resins. II. Effect of polyetherimide content

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Synthesis of poly(hydroxyethyl methacrylate)‐b‐poly(propylene glycol)‐b‐poly(hydroxyethyl methacrylate)reactive block copolymer with controlled reactivity for toughening multifunctional epoxy resin

High-Impact Epoxy Resins with Superior Hydrophobicity Toughened by Epoxy Functionalized Poly(olefin-alt-maleimide) Derivatives

Isocyanate-terminated Polyethers Toughened Epoxy Resin:Chemical Modification,Thermal Properties,and Mechanical Strength

Phenyl, propyl polysiloxane modified epoxy resin II: The co-continuous phase, concurrently strengthening and toughening mechanism

Synergistic toughen epoxy resin by incorporation of polyetherimide and amino groups grafted MWCNTs

Toughening and strengthening of low-temperature resistant epoxy resins by introducing high-performance thermoplastic resin with phthalazinone structure

Mixed Hyperbranched Poly(aryl Ether Ketone) Results in High Toughness and Excellent Thermal Resistance in Epoxy Resin

Flexible Epoxy Resins Formed by Blending with the Diblock Copolymer PEO-b-PCL and Using a Hydrogen-Bonding Benzoxazine as the Curing Agent

Preliminary investigation of a second thermoplastic modifier incorporation effect on the phase behavior and morphology of epoxy/PEI curing systems

Fracture behavior of high‐performance carbon fiber composites toughened by reactive polyetherimide