Abstract:Selective laser melting (SLM) in situ alloying is an effective way to design and fabricate novel materials in which the elemental powder is adopted as the raw material and micro-areas of elemental powder blend are alloyed synchronously in the forming process of selective laser melting (SLM). The pre-alloying process of preparation of raw material powder can be left out, and a batch of bulk samples can be prepared via the technology combined with quantitative powder mixing and feeding. The technique can be applied to high-throughput sample preparation to efficiently obtain a microstructure and performance data for material design. In the present work, bulk equiatomic FeCoCrNi high-entropy alloys with different processing parameters were fabricated via laser in situ alloying. Finite element simulation and CALPHAD calculation were used to determine the appropriate SLM and post-heating parameters. SEM (scanning electron microscope), EDS (energy dispersive spectroscopy), XRD (X-ray diffraction), and mechanical testing were used to characterize the composition, microstructure, and mechanical properties of as-printed and post-heat-treated samples. The experimental results show that the composition deviation of laser in situ alloying samples could be controlled within 20 wt %. The crystal structure of as-printed samples is a single-phase face-centered cubic (FCC), which is the same as those prepared by the traditional method. The mechanical properties of the samples prepared by laser in situ alloying with elemental powder blend are comparable to those prepared by pre-alloying powder and much higher than those prepared by the traditional method (arc melting). As-printed samples can get a homogeneous microstructure under the optimal laser in situ alloying process combined with post-heat treatment at 1200 °C for 20 h.

Study on Laser Reactive Sintering of Fe-Al Powder Compacts

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Effect of Fe2O3 content on microstructure of Al powder consolidated parts via selective laser melting using various laser powers and speeds

Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion

Effect of Al Content on Reaction Laser Sintering of Ni-Al Powder

Optimization of microstructure and properties of laser sintered Ni30Cr25Al15Co15Mo5Ti5Y5 high-entropy alloy coatings via controlling plasma

Microstructure Characteristics of Fe-Al Intermetallic Compound Coating Synthesized by Light Beam Alloying

Effect of laser shock on the compacting characteristics and rebound behavior of composite powders (Al2O3/Al) with different alumina contents

Microstructure and Mechanical Properties of FeCoNiCrAlx High-entropy Alloys by Selective Laser Melting

Research on the Mechanical Properties of AlCoCrFeNi + CoCrNi Fabricated by Laser Melting Deposition

Microstructure and properties of in situ synthesized Fe-Al coating by laser cladding

Microstructure Evolution of Intermetallics Produced by Laser Powder Deposition

Residual Stress Distribution in Laser Alloying Zone with FeCSiB Powder

Mechanical behavior and microstructure evolution of Al-Cu-Mg alloy produced by laser powder bed fusion: Effect of heat treatment

Fabricating Homogeneous FeCoCrNi High-Entropy Alloys via SLM In Situ Alloying

Composition design method of Al-Cu alloy for laser powder bed fusion

Effect of La2O3on Microstructure and Properties of Cu20Fe80alloy by Microwave Sintering

Microstructure and mechanical properties of Fe3Al based alloy fabricated by laser metal deposition

High throughput in-situ synthesis of Fe-Cr-Ni alloys via laser powder bed fusion: exploring the microstructure and property evolution

Preparation of Ti2AlC through in-situ selective laser forming and reaction sintering