Abstract:Laser powder bed fusion (LPBF)-fabricated Al matrix composites reinforced with SiC particles are strongly influenced by SiC particle features. In this study, the microstructural features, mechanical properties, and porosity of moderate volume fraction (10 vol%) microscale SiC-particle-reinforced AlSi10Mg composites fabricated by LPBF under different oxidation temperatures of SiC particles were investigated. The results demonstrate that LPBF-deposited SiCp/AlSi10Mg composites mainly exhibited laser track segments in macroscale and fine cellular-like dendrite grains and (Al + Si) eutectic phases within the melt pool on a microscale. The transition layer of MgAl2O4 was present around the SiC particles in the oxidized-SiCp reinforced AlSi10Mg composites. In addition, the pore spatial distribution of the deposited composites using the microcomputed tomography test and the microstructural formation mechanism using Thermal Calc software were also studied. Using the finite element to model the deposited composites, it was found that the stress and strain distribution presented higher values than those without long-stripe precipitation phases in the deposited parts with long-stripe precipitation phases. The LPBF-fabricated oxidized-10 vol% SiCp/AlSi10Mg composite part with a relatively large ultimate tensile strength (-405.3 MPa), relative density (-98.89%), compressive strength (-1046 MPa) and friction coefficient (0.32) were obtained. In particular, the ultimate tensile strength was larger than that of the other reported SiCp/AlSi10Mg composites with similar volume fractions and particle sizes.

Effect of Fe2O3 content on microstructure of Al powder consolidated parts via selective laser melting using various laser powers and speeds

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Effect of Fe Addition on Heat-Resistant Aluminum Alloys Produced by Selective Laser Melting

Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

A high Fe-containing AlSi12 alloy fabricated by laser powder bed fusion

Effects of powders and process parameters on density and hardness of A357 aluminum alloy fabricated by selective laser melting

Effects of the microstructure and texture characteristics on mechanical properties of the Al–Ni–Cu–Fe alloy manufactured by laser powder bed fusion

Microstructure and mechanical properties of Fe3Al based alloy fabricated by laser metal deposition

Microstructure and mechanical properties of Al2O 3/TiAl in situ composites doped with Fe2O3

Microstructure and mechanical properties of Al-Fe-Sc-Zr alloy additively manufactured by selective laser melting

Effect of Processing Route on Microstructure and Mechanical Properties of an Al-12Si Alloy

Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW

Magnetic, Electrical, and Physical Properties Evolution in Fe3O4 Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method

Laser Powder Bed Fusion of Oxidized Microscale SiC-particle-reinforced AlSi10Mg Matrix Composites: Microstructure, Porosity, and Mechanical Properties

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

Effect of Al content on the microstructure and mechanical properties of the sintered Fe–Mn–Al porous steel

Understanding effect of Mg and Mn equivalents on columnar-to-equiaxed transition of high-strength Al alloy fabricated by laser powder bed fusion

Study on Microstructure and Corrosion Resistance of FeCoCrNiMo/Al-10Si Composites Prepared by Laser Deposition