Abstract:Tantalum-tantalum carbide (Ta-TaC) core–shell rod-reinforced iron-based composites were designed and fabricated by in situ solid-phase diffusion reaction at 1150 °C for 5, 10, 15, 20, and 80 min, respectively. Phase composition, microstructure, impact toughness, micro-hardness, and elastic modulus of the composite, morphologies and grain sizes of TaCs were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, impact test, and nano-indentation test. Furthermore, formation kinetics of TaC-Fe shell layer was analyzed by measuring the thickness of pure TaC layer as a function of heat treatment time and temperature. Results indicated the generation of dense and compact TaC layer around the Ta rod by in situ solid-phase diffusion reaction, and together they were designated as the Ta-TaC core–shell rod. Predominant features of the Ta-TaC core–shell rod included a gradient nanostructured TaC-Fe shell layer and a Ta core. Predominant phases of the Ta-TaC core–shell rod-reinforced iron-based composite were Ta, TaC, and α-Fe phases. Kinetic results of TaC-Fe shell layer exhibited parabolic relationship between the thickness of pure TaC layer and annealing time, and growth rate constant for pure TaC layer was estimated to be 6.25 × 10−8 cm2 s−1. TaC particles in TaC-Fe shell layer preferred a perfect cube morphology enclosed by {100} facets with minimized total surface free energy. Grain size of TaC increased gradually from about 150 to 500 nm with the increasing distance from the interface of Ta core/TaC-Fe shell layer to the substrate. The Ta-TaC core–shell rods play an important role in improving the mechanical properties of the composite. Micro-hardness of the TaC-Fe shell layer was in the range of 10.4–24.8 GPa, which is 3–8 times than that of the substrate due to the dense and compact TaC. Impact toughness of the composite was 100.6 J cm−2, which is markedly higher than that of the gray cast iron (7.8 J cm−2). Excellent impact toughness of the composite is mainly attributed to Ta core of Ta-TaC core–shell rod, which undergoes a large plastic deformation under external forces. Moreover, the compact TaC distributed around Ta rod reduced split action to the matrix, and the matrix absorbed large amount of crack propagation energy.

Microstructure and Scratch Resistance of TaC Dense Ceramic Layer on an Iron Matrix

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Study on Microstructure and Fracture Toughness of TaC Ceramic Coating on HT300

Study on the Interface Microstructure of TaC/GCr15 Steel Surface Reinforced Layer Formed by In-Situ Reaction

Evaluation of Fracture Toughness of Tantalum Carbide Ceramic Layer: A Vickers Indentation Method

Fabrication, Microstructure and Abrasive Wear Characteristics of an in Situ Tantalum Carbide Ceramic Gradient Composite

Preparation of a gradient nanostructured surface TaC layer-reinforced Fe substrate by in situ reaction

Microstructure and impact properties of Ta-TaC core–shell rod-reinforced iron-based composite fabricated by in situ solid-phase diffusion

Infiltration casting and in situ fabrication of tantalum carbide particulate-reinforced iron matrix composites

Bonding properties and corrosion resistance of TaC-Fe enhanced layer on GCr15 surface prepared by in-situ hot pressing

In Situ Preparation of Micro–Nano Tantalum Carbide Ceramic

Research on Mechanical Characteristic of Micro-Nano Structure TaC Ceramic by Nanoindentation

Research on Microstructure and Formation Mechanism of TiC Particles Reinforced Iron Matrix Surface Gradient Composite by In-situ Technology

Microstructure and Fracture Toughness of a WC-Fe Cemented Carbide Layer Produced by a Diffusion-Controlled Reaction

Fabrication of TaC Coating on Tantalum by Interstitial Carburization

Microstructure and Properties of Bulk Ta2AlC Ceramic Synthesized by an in Situ Reaction/hot Pressing Method

Microstructure and high-temperature wear properties of in situ TiC composite coatings by plasma transferred arc surface alloying on gray cast iron

TiC Reinforcement Composite Coating Produced Using Graphite of the Cast Iron by Laser Cladding

Microstructures and mechanical properties of functionally graded TiCN–TaC ceramics prepared by a novel layer processing strategy

Abrasive wear characteristics of in-situ TiC-reinforced iron matrix surface gradient composites

Friction and Wear Behavior and Mechanism of Tantalum Carbide/Iron Surface Composites under Different Load