Abstract:Low vacuum and high temperature typically promote the evaporation of moisture and exacerbate concrete shrinkage cracking, which highlights the issue of volume stability for concrete materials in some engineering environments (e.g. the operational environment of ultra-high-speed train in the low-vacuum tube). To evaluate its impact on moisture transport and drying shrinkage of mature concrete, different air pressure and temperature conditions were selected and the correspondent experiments of investigating moisture loss, internal relative humidity, and drying shrinkage after exposure were conducted. And the evolution of different types of moisture, hydration degree, pore structure, and morphology of matrix was analyzed through microscopic testing methods. Experimental results present that compared to the standard drying condition, the moisture loss and drying shrinkage of concrete under low vacuum and high temperature condition increased by more than 48.5 % and 77.4 % respectively. There exists a strong correlation between moisture loss and drying shrinkage of matrix after low vacuum and high temperature exposure. Besides, compared to the sole effect of low vacuum, the coupling effect of low vacuum and high temperature has a more significant impact on the moisture transport and drying shrinkage of concrete. Among them, after prolonged exposure to low vacuum and high temperature, the internal relative humidity of matrix drops to 50 %similar to 60 %, and the corresponding critical aperture reduces to 1.0-1.5 nm, thereby significantly increasing the shrinkage stress of concrete. Furthermore, low vacuum and high temperature condition reduces the content of capillary water, gel water, and chemically combined water, and leads to the loss of moisture in smaller pores. In addition, for mature concrete, low vacuum and high temperature condition not only impedes cement hydration but also induces the coarsening of pore structure, resulting in an increase in the number of macropores and pores around 50 nm, which correlates highly with the evolution of drying shrinkage.

Study on Mass Diffusivity of Concrete Under Isothermal Condition

Experimental Determination of the Water Vapor Diffusion Coefficient of Autoclaved Aerated Concrete (aac) Via A Transient Method: Effects of the Porosity and Temperature

Comparative Study On Testing Methods Of Chloride Ions Diffusion Coefficient In Concrete

Theoretical Modeling and Verification of Concrete Moisture Diffusion Surface Factor

Characterization of effective moisture diffusivity based on pore structure of concrete

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Moisture Diffusion Coefficient of Concrete under Different Conditions

Differential Effective Medium Theory for the Chloride Diffusivity of Concrete

Coupled Heat and Moisture Transfer Analysis of Concrete

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete

Determination of Moisture Diffusion Coefficient of Concrete at Early Age from Interior Humidity Measurements

Numerical Analysis of Moisture Influential Depth in Concrete and Its Application in Durability Design

Literature review of heat and moisture diffusion in concrete

Effect of Thermal Parameters on Hydration Heat Temperature and Thermal Stress of Mass Concrete

Study on the Process of Isothermal Continuous Drying and Its Effect on the Strength of Concrete of Different Strength Grades

Effects of Moisture Diffusion and Self-Desiccation on the Early-Age Concrete's Internal Relative Humidity

Influence of Low Vacuum and High Temperature Condition on Moisture Transport and Dry Shrinkage of Mature Concrete

Numerical Analysis of Moisture Influential Depth in Concrete During Drying-Wetting Cycles

The Research of the Effect of Dynamic Load and Temperature on the Diffusion Performance of Chlorideion in Concrete

Water absorption and measurement of the mass diffusivity in porous media