Abstract:Based on electromagnetic flux leakage (EMFL), a nondestructive testing (NDT) technique for the detection of gas pipe wall thickness is presented, and its principle and feasibility is evaluated by means of equivalent magnetic circuit analysis and finite element analysis. An online NDT device adopting this technique is developed, and its structure and working principle are introduced in detail. This device is composed of a detector array with 32 pipe wall thickness sensors that employ a Hall element as the element for sensing the magnetic flux density, and it can be adapted to pipe diameters from Ø400mm to Ø650 mm. On the basis of the experimental investigation for this device, the influences of some factors on thickness measurement, namely the excitation current, excitation coil turns, gap distance, concentrator of the magnetic field, magnetization time, and number of sensors in the detector array, are revealed and the optimal excitation voltage for the sensors of the detector array is selected. The measuring calibration is given to establish the relationship between the pipe wall thickness and the output voltage of the sensors. The results show that the proposed EMFL for measuring the wall thickness of ferromagnetic pipe is feasible, the technical parameters of the sensor are important for improvement of measurement precision and resolution, and the developed device has precision, resolution, and a linear output curve. Carried by the developed gas pipeline inspection robot through a universal joint, this NDT device can move inside the gas pipeline and monitor the state of the pipe wall.

Thickness Testing Sensor for Gas Pipe Wall

Detection of Gas Pipe Wall Thickness Based on Electromagnetic Flux Leakage

Research on the Sensor Used for Inspecting the Thickness of Pipes

Analysis and Experimental Study on the Measurement of Pipe Wall Thinning by Perturbation Method

Research on a Pipeline Thinckness Measurement System Based on a Magnetic Flux Leakage Principle

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

1509 Microwave Measurement and Evaluation of Wall Thinning in Metal Pipes

332 Remote Measurement of Pipe Wall Thinning by Microwaves

Research on on-line detection system for natural gas pipeline

Microwave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes

Application of Microwaves for Nondestructive and High-Efficiency Detection of Wall Thinning Locations in a Long-Distance Metal Pipe

G0310501 A Method for Quantitative Evaluation of Pipe Wall Thinning Using Microwaves

A high-efficiency nondestructive method for remote detection and quantitative evaluation of pipe wall thinning using microwaves

Thickness Measurement and Detection for Magnetic Materials Using Magnetic Leakage Flux Method

Remote Measurement Of The Pipe Thickness Reduction By Microwaves

Laser ultrasonic system for metal pipe wall thickness measurement: Differential signal processing and geometric compensation calculation model

Measurement of surface temperature and pressure of thin-walled vessels based on Rayleigh wave

Study on the Relationship Between Thickness Measurement and Strength Defect of Buried Pipeline

Pipeline thickness measurement for in-line inspection using wholly stepped electromagnetic acoustic transducers

Application of Fiber Bragg Grating Sensor Technology to Leak Detection and Monitoring in Diaphragm Wall Joints: A Field Study

A Study of Quantifying Thickness of Ferromagnetic Pipes Based on Remote Field Eddy Current Testing