Abstract:The thickness measurement of large thin-walled part has become increasingly important to inspect the machining quality and compensate the machining errors. So far, commercial hand-held ultrasonic thickness gauges have been widely used in the wall thickness inspection of large thin-walled parts. However, the manual operation has some disadvantages such as insufficient measurement efficiency, intensive labor, and limited accuracy. To tackle these problems, an automatic thickness measuring method is supposed to be an effective approach. In this article, an ultrasonic on-machine scanning technique for thickness measurement of large thin-walled parts is proposed. First, a multi-function integrated ultrasonic thickness on-machine measuring device is innovatively designed, which enables the posture of an ultrasonic sensor to adapt to the measured surface orientation automatically. Second, the on-machine measurement model of the thickness distribution is established, which includes a measuring point coordinate extraction model and a precise thickness assessing model. Then, a scanning motion control strategy for contact ultrasonic measurement is proposed to maintain a constant pressure between the ultrasonic transducer and the workpiece during the scanning process. Finally, taking the arched part, inclined plate, and S-shaped thin-walled part as typical objects, the experimental study has been conducted using the proposed method. The experimental results show that the ultrasonic thickness on-machine measurement accuracy can be controlled within 0.04 mm, which validates the feasibility of the ultrasonic thickness on-machine scanning technique on thickness measurement of complex surface thin-walled parts.

Laser ultrasonic system for metal pipe wall thickness measurement: Differential signal processing and geometric compensation calculation model

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

A Novel Laser Ultrasonic Thickness Measurement Method for Metal Plate Based on Spectral Analysis

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Microwave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes

Research on the Integrated Ultrasound and Eddy Automatic Inspection System of Seamless Steel Pipe

1509 Microwave Measurement and Evaluation of Wall Thinning in Metal Pipes

Application of Microwaves for Nondestructive and High-Efficiency Detection of Wall Thinning Locations in a Long-Distance Metal Pipe

Detecting features of defect metal based on laser ultrasonic technique

Noncontact Laser Inspection Based on a PSD for the Inner Surface of Minidiameter Pipes.

Analysis and Experimental Study on the Measurement of Pipe Wall Thinning by Perturbation Method

Wall thickness measurement and defect detection in ductile iron pipe structures using laser ultrasonic and improved variational mode decomposition

A high-efficiency nondestructive method for remote detection and quantitative evaluation of pipe wall thinning using microwaves

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

332 Remote Measurement of Pipe Wall Thinning by Microwaves

Weld Quality Inspection of Small-Diameter Thin-Walled Pipes by a Laser Ultrasonic Method.

Ultrasonic on-machine scanning for thickness measurement of thin-walled parts: modeling and experiments

Pipeline thickness measurement for in-line inspection using wholly stepped electromagnetic acoustic transducers

Optimizing the Frequency Range of Microwaves for High-Resolution Evaluation of Wall Thinning Locations in a Long-Distance Metal Pipe

G0310501 A Method for Quantitative Evaluation of Pipe Wall Thinning Using Microwaves

Three-Dimensional-Scanning of Pipe Inner Walls Based on Line Laser