Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Unified Plastic Limit of Clamped Circular Plate with StrengthDifferential Effect in Tension and Compression

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

UNIFIED SOLUTIONS FOR PLASTIC LIMIT OF ANNULAR PLATE

THE UNIFIED SOLUTION FOR AN ELASTO-VISCOPLASTIC PROBLEM

Unified Characteristics Line Theory of Spacial Axisymmetric Plastic Problem

UNIFIELD PLASTIC LIMIT ANALYSIS OF METAL CIRCULAR PLATES SUBJECTED TO BORDER UNIFORMLY DISTRIBUTED LOADING

UNIFIED PLASTIC LIMIT ANALYSES OF CIRCULAR PLATES UNDER UNIFORM ANNULAR LOAD

The Unified Characteristic Theory for Plastic Plane Stress Problems

Unified Solution of a Borehole Problem with Size Effect

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

A Unified Characteristic Theory for Plastic Plane Stress and Strain Problems

Solutions of some plastic plain strain problems based on unified strength theory and unified slip line field theory

UNIFIED LIMIT SOLUTION FOR OBLIQUE PLATES OF METAL

The Unified Limit Load Solution of Fiber-reinforced Concrete Cylinders Considering the Strain Softening of Material

Upper-bound Limit Analysis Method of Thin Plates Based on the Nonconforming Rectangular Bending Element

Elastic - Plastic Solution of Expansion of Spherical Cavities under 3D Loading

Buckling of Piecewise Member Composed of Steel and High-Strength Materials in Axial Compression

Buckling of Simply Supported Thin Plate with Variable Thickness under Bi-Axial Compression Using Perturbation Technique

Analytic Solutions for a Uniformly Loaded Circular Plate with Clamped Edges

Upper Bound Limit Analysis of Plates Utilizing the C1 Natural Element Method

UNIFIED MANNER TO ELIMINATE THE CORNER SINGULARITY OF UNIFIED STRENGTH THEORY