Abstract:Iron(II,III) oxide (Fe3O4) nanoparticles have shown great promise in many magnetic-related applications such as magnetic resonance imaging, hyperthermia treatment, and targeted drug delivery. Nevertheless, these nanoparticles are vulnerable to oxidation and magnetization loss under ambient conditions, and passivation is usually required for practical applications. In this work, a home-built rotating fluidized bed (RFB) atomic layer deposition (ALD) reactor was employed to form dense and uniform nanoscale Al2O3 passivation layers on Fe3O4 nanoparticles. The RFB reactor facilitated the precursor diffusion in the particle bed and intensified the dynamic dismantling of soft agglomerates, exposing every surface reactive site to precursor gases. With the aid of in situ mass spectroscopy, it was found that a thicker fluidization bed formed by larger amount of particles increased the residence time of precursors. The prolonged residence time allowed more thorough interactions between the particle surfaces and the precursor gas, resulting in an improvement of the precursor utilization from 78% to nearly 100%, even under a high precursor feeding rate. Uniform passivation layers around the magnetic cores were demonstrated by both transmission electron microscopy and the statistical analysis of Al mass concentrations. Individual particles were coated instead of the soft agglomerates, as was validated by the specific surface area analysis and particle size distribution. The results of thermogravimetric analysis suggested that 5 nm-thick ultrathin Al2O3 coatings could effectively protect the Fe3O4 nanoparticles from oxidation. The x-ray diffraction patterns also showed that the magnetic core crystallinity of such passivated nanoparticles could be well preserved under accelerated oxidation conditions. The precise thickness control via ALD maintained the saturation magnetization at 66.7 emu/g with a 5 nm-thick Al2O3 passivation layer. This good preservation of the magnetic properties with superior oxidation resistance will be beneficial for practical magnetic-based applications.

Surface Modification of Fe3O4 Nano Particles and Its Applications in Preparation of Magnetic Alumina Catalyst Supports

Preparation and Surface Modification of Magnetic Fe3O4 Nanoparticles

Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles

Preparation and characterization of core-shell γ-Fe2O 3@SiO2@Al2O3 magnetic catalyst

Preparation and characterization of SiO2 coated Fe3O4 nanoparticles

Preparation and Surface Modification of Fe<sub>3</sub>O<sub>4 &Lt;/sub>nano-Magnetic Powders

Synthesis, Surface Modification and Characterization of Magnetic Fe3O4@SiO2 Core-Shell Nanoparticles

Preparation of SiO2/(γ-Fe2O3-SiO2 ) Magnetic Catalyst Carrier

Preparation and surface modification of magnetic nano-Fe_3O_4

Preparation, Surface Functionalization and Application of Fe3O4 Magnetic Nanoparticles

Preparation and Characterization of Core-Shell Γ-Fe<sub>2</sub>o<sub>3</sub>@sio<sub>2</sub>@ Al<sub>2</sub>O<sub>3</sub> Magnetic Catalyst

Surface Modification of a Magnetic SiO2 Support and Immobilization of a Nano-TiO2 Photocatalyst on It

Surface Passivation of Fe3o4 Nanoparticles with Al2o3 Via Atomic Layer Deposition in A Rotating Fluidized Bed Reactor

Preparation of magnetic spherical Al2 O3 composite particles by hydrolyzation of urea

Microstructure, Formation Mechanism and Magnetic Properties of Fe1.82Si0.18@Al2O3 Soft Magnetic Composites

The study of novel Fe3O4@γ-Fe2O3 core/shell nanomaterials with improved properties

Synthesis of silica-coated polygonal Fe3O4 nanoparticles

Preparation and application of silica coated Fe_3O_4 magnetic nanoparticles

Surface Organic Modification of Fe 3 O 4 Magnetic Nanoparticles

Monodisperse Fe3o4/Fe@Sio2 Core/Shell Nanoparticles With Enhanced Magnetic Property