Abstract:Flow boiling in mini channels with micro pin fins is a promising heat sink technique to achieve high-efficient aircraft thermal management. The accurate prediction of its heat transfer coefficient is critical for the practical design of two-phase heat exchanger based on mini channels with micro pin fins. Previous investigation shows that heat transfer coefficient prediction accuracy of the machine learning method is generally better than that of conventional empirical correlations. However, the machine learning method cannot guarantee its prediction accuracy among different data domains. To extend the application region of the conventional machine learning method, a transfer learning framework was proposed in present study. First of all, an experimental system was built to acquire test data from different sample domains (i.e., the diamond pin fins with different geometries). Then a conventional machine learning model was developed based on the deep learning method. Furthermore, the developed deep learning model was adjusted with transfer learning process, and the performance of these two kinds of models (i.e., conventional machine learning model and transfer learning model) was comprehensively evaluated. Results showed that the conventional machine learning model had a good prediction accuracy with an overall deviation of 4.11 % but was only confined in the same data domain as training data. Differently, the transfer learning model with 70 % data set from the new domain can achieve appropriate prediction in the new domains with deviation of 4.28 %. The results of this paper demonstrated that the conventional machine learning model can extend into different domains with reasonable prediction accuracy through transfer learning frameworks. It will benefit the practical design of high-efficiency heat exchangers for aircraft thermal management.

Regression algorithm based on minimum variance and its application in heat exchanger measurement

Single-phase Heat Transfer Correlation Based on Minimum Variance

A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers

Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Exploring novel heat transfer correlations: Machine learning insights for molten salt heat exchangers

A Comprehensive Empirical Correlation for Finned Heat Exchangers with Parallel Plates Working in Oscillating Flow

Integral identification of fluid specific heat capacity and heat transfer coefficient distribution in heat exchangers based on multiple-case joint analysis

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Assessing the effects of fluids flow on heat transfer performance in direct contact heat transfer process through EMD-LSSVM model: An experimental study

NEW FLOW-PATTERN-BASED HEAT TRANSFER CORRELATIONS FOR WATER IN MICRO/MINICHANNELS

Study of Heat Transfer for Co2 Flow Boiling in Horizontal Small Diameter Tubes

Analytical and Numerical Study on the Uniformity of Temperature Difference Field in Heat Exchangers

Transfer learning model to predict flow boiling heat transfer coefficient in mini channels with micro pin fins

Study on Flow Boiling of Refrigerants in Micro/Mini-Channels

Heat Transfer Correlations for Single-Phase Flow, Condensation, and Boiling in Microfin Tubes

Variable-dimension optimization study and design of internally finned helically coiled tubes heat exchangers based on numerical simulation and experiment

A thermal calculation model for tubular condensing heat exchanger

Comparison of Various Flow Maldistribution Quantification Methods in Mini Heat Exchangers: A Numerical Study

Theoretical and experimental study on a novel evaluation criteria of heat exchangers applied in aero engines

Simple Flow-Pattern Based Heat Transfer Correlations For Flow Boiling In Micro/Minichannels