Design of Data Playback System Based on LabVIEW

刘卓,张维竞,聂鹏瑜

DOI: https://doi.org/10.3969/j.issn.1006-2394.2003.06.005

2003-01-01

Abstract:This paper provides design principle of data playback system based on LabVIEW and some problems which should be cared.

What problem does this paper attempt to address?

Virtual Design of Precision Irrigation Detection System

Zeng-fang LI,Yi-dan BAO,Jie-hui SHEN

DOI: https://doi.org/10.3969/j.issn.1008-536X.2009.04.013

2009-01-01

Abstract:A kind of precision irrigation detection and control system based on LabVIEW was developed,which consists of the sensors,test instruments,data acqusition board and LabVIEW software.This system has several functions as irrigation information collection,real-time monitoring,crop water requirement calculations,fuzzy control and decision-making.The test results show that the system has friendly interface and easy to use,which can achieve better forecasting of water demand and information management of crop irrigation.
Labview-Based Virtual Laboratory for Digital Signal Processing

Feng Gao,Wu Yun,Shang-qiong Lu

DOI: https://doi.org/10.4028/www.scientific.net/amr.268-270.2150

2011-01-01

Advanced Materials Research

Abstract:Based on National Instruments LabVIEW 2009, a network-edition virtual laboratory for digital signal processing (DSP) has been developed. Which is composed of three functional modules, that is, virtual experiment table, information management, and network communication. Hereinto, virtual experiment table is composed of two sub-modules, i.e. resource & document and simulation experiment; information management module is composed of four sub-modules, i.e. database, user registration, security verification and system management; network communication module is implemented by LabVIEW Web Server. The DSP Virtual Laboratory is suit for experimental teaching of a range of subjects, such as Digital Signal Processing, Signals & Systems, etc. And the designed virtual laboratory can provide users with a remote virtual experimental platform without time and space constraints.
Research on USB Data Transmission Technology Based on LabVIEW

程龙飞,何闻

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.07.036

2009-01-01

Abstract:The USB data transmission technology based on LabVIEW was studied.The USB interface circuit which core chip is PDIUSBD12 produced by PHILIPS,the firmware programming method of the USB interface circuit,and the specific method of compiling application which is based on the LabVIEW were introduced.The result in the data transmission test shows that it can realize the data transmission between superior monitor and inferior computer by using LabVIEW and USB interface.
Study on Digital Testing System of SLD Based on LabVIEW

XU Wei-lin,SHU Xiao-wu,MOU Xu-dong,LIU Cheng

DOI: https://doi.org/10.3969/j.issn.1005-5630.2005.01.013

2005-01-01

Abstract:Super-uminescent diode(SLD) are usually applied in fiber optical sensor. The stability of SLD has an vital effect on performance of entire system, so it is necessary to evaluate SLD before its application. Usually the test of the SLD is a complicated task,it will generate huge data to process. According to the idea of virtual instrument,we setup a series of program base on LabVIEW combine with Matlab, to implement the automatization of the SLD test ,also to enhance the efficiency and reliability of the test system.
Study of Teledata Acquisition System Based on LabView

张正华,李锡华

DOI: https://doi.org/10.3969/j.issn.1004-373X.2003.24.034

2003-01-01

Abstract:The data acquisition is a hotspot in industry control research what based on LabView.In this character,it is introduced the LabView which is the graphics languageprogramming the PCL711B, and achieve the temperature collection, and Secondary channel RS232′s interface by way of the light end machine is realized telecommunication of data.
Data Transfer Mode for Measurement and Control Software Based on LabVIEW

谢之柱,杨世锡,顾小军

DOI: https://doi.org/10.3969/j.issn.1001-182X.2007.07.023

2007-01-01

Abstract:LabVIEW traditional closely coupled dataflow increases the difficulty of using LabVIEW in large-scale measurement and control system.This paper aims at the characteristic and shortage of LabVIEW,uses the publisher/subscriber communication model to present a wireless dataflow transfer mode for the data interaction between the modules in large-scale measurement and control system.This data transfer mode inherits the time,space and synchronization decoupling form the publisher/subscriber model,realizes the dynamic flexible interaction between the modules in large-scale system,improves the scalability of the system and the reusability of the modules.
Design of automatic hydraulic test bench based on LabVIEW

Fang Chen,Gangfeng Yan

DOI: https://doi.org/10.1109/MACE.2011.5987149

2011-01-01

Abstract:This paper introduces virtual instruments technology and develops a hydraulic test bench based on it. This test bench realizes the function of data acquisition, real-time display, output configuration, pressure adjustment, test data saving and report generation. Architecture of the test bench is introduced and its LabVIEW-based software design method is illustrated in detail. Compared to traditional systems, this test bench has many advantages like fast designing, easily expanding and automatic data judgment.
Application of LabVIEW in Acquisition and Processing Software for Large Volume of Data

张云亮,冯平法,鲍晟

DOI: https://doi.org/10.3969/j.issn.1000-0380.2012.07.006

2012-01-01

Abstract:In research and development of data acquisition system,it is required that the large volume of data can be recorded and stored in long term,and the data acquired in previous tests can be processed conveniently,as well as their curves can be printed in reports.By combining with the current conditions of hardware,the problems encountered in software design are analyzed and the detailed solutions are given.By flexibly using the powerful functions provided by LabVIEW software,such as the using of the shift register and the attribute nodes of each controls,and the usaging of report function in Report Generation Toolkit,the design requirements are achieved.
Design of multi-functional portable electronic experimental box based on Labview and ARM

Jiang Junmin,Hao Ziyi,Lan Fan,Yao Yingying

DOI: https://doi.org/10.3969/j.issn.1672-1438.2011.07.022

2011-01-01

Abstract:The multi-functional portable electronic experimental box is based on ARM7 LPC2148 32-bit microcontroller,integrating DDS digital phase synthesis signal generator AD9850,cooperating with computer's communication system and the sound card's signal collection system,and making use of a computer host process developed by Labview.After data collection,computer programs process and display the data to work as a virtual oscilloscope.The whole system and the circuit boards equipped with the common devices are placed in a small box,providing portable test environment.It brings convenience to the basic electronic experimental class presentation and students' independent experiments and has brought about a innovaton model of interactive practice in the teaching of electronic technology courses.
A Labview-Based, Interactive Virtual Laboratory for Electronic Engineering Education

Y Zhou,JJ Jiang,SC Fan

2005-01-01

International Journal of Engineering Education

Abstract:Virtual laboratories extend the application area of virtual instrumentation to the web, which leads to an openly integrated environment for sharing teaching and learning materials and hardware and software resources. An interactive Virtual Laboratory for Electronic Engineering Education (VLE) was implemented based on Lab VIEW and other engineering education software such as MATLAB Simulink, MS Office and SQL Server. It consists of two sections: virtual simulation and real-time measurement. The system architecture, hardware configuration and system implementation are presented. Compared with existing virtual laboratories, VLE provides significant advantages and improvements in development efficiency, system expandability, flexibility for working independently, and multithreading safety.
The Laboratory Management System Based on LabView

FU Xiao-cheng,WANG Xiao-hai,WU Guo-zhong

DOI: https://doi.org/10.3969/j.issn.1003-2843.2006.06.043

2006-01-01

Abstract:The application of the virtual technique in experiment is very important.The paper gives a design project of the laboratory management system based on LabView.The functions and the application examples of the system are described in detail.Based on virtual instrument with the combination of database technique and web technique and taking advantage of network technique and virtual instrument technique,remote data can be collected easily,which realizes the share of hardware resources.
Design of virtual digital oscilloscope based on LabVIEW

Feiqing Wu,Fengyuan Yang,Dongdong Ma,Chengyu Wu

DOI: https://doi.org/10.1051/e3sconf/202126801059

2021-01-01

E3S Web of Conferences

Abstract:Electrical and electronic experiment teaching is an indispensable and important part of engineering teaching. Oscilloscope is an indispensable experimental instrument in the teaching of these experiments, which is used to measure the electrical signals in the experimental process for analysis and processing. In this paper, a dual-channel virtual oscilloscope was designed based on the PC 16-bit sound card, which could correctly collect electronic signals within ±1V. Through LabVIEW graphical programming and multi-threading technology, these functions such as waveform display, channel selection control, parameter measurement and display, waveform storage and playback were realized. The innovation of this design is that it could automatically generate experimental report, simplifying the tedious operations such as drawing waveforms and filling parameters, finally quickly getting illustrated experimental report. From the test results, it can meet the requirements of daily experimental teaching, and it is of great significance to improve the quality of electrical and electronic experimental teaching.
Design of virtual circuit experiment based on the LabVIEW

Hui ling Si

DOI: https://doi.org/10.2991/ipemec-15.2015.206

2015-01-01

Abstract:This article is designed by the LabVIEW circuit experiment module, common in the course each module specific program design scheme is given, and ultimately successful debugging operation. Based on the introduction of virtual instrument, can not only save costs, and to update and adjust teaching methods and means to make laboratory equipment maintain...
Automatic Playback System

Li-na SHANG,Xin-min X(U)

DOI: https://doi.org/10.3969/j.issn.1002-8684.2005.03.010

2005-01-01

Abstract:The paper introduces the design of an automatic playback system. Based on ISD4004, keyboard, LED and ROM controlled by 89C52, playback can be automatically performed. The process is programmable and labour-saving.
Problems and Solutions of LabVIEW Program Flow Control

HU Jia,DENG Yan

DOI: https://doi.org/10.3969/j.issn.1000-8829.2007.11.016

2007-01-01

Abstract:LabVIEW is applied in measurement and control fields more and more widely.Graphic programming and data stream driving mode are the two remarkable features of LabVIEW.Comparing with the order driving mode of the traditional text programming language,such as C/C++ and BASIC,data stream driving mode can implement concurrent processing easily.But some difficulties in program flow control would also be caused by data stream driving mode.With three problems of periodic structure control,subprogram calling control and occupancy of systematic resources,the issues of LabVIEW program flow control are investigated in detail,and the resolutions are also provided.
Design of VI Data Collecting System Using Customized USB Card

Junjie Wang

2006-01-01

Abstract:At present,most teaching experiment systems are using the virtual instrument technology(VI) for the development of data collecting system more and more. And the core of VI is the data collecting card and the card driver as well as the analyzing software.In our experiment system of vibration condition monitoring,we used customized USB card and programmed the driver and especially we linked the USB card with Labview.This can both save the cost and make full use of the function of VI.So it is a very good method of developing experiment system in labs.
Realization of database system based on ADO and SQL in LabVIEW environment

Tang Bo,Pan Hongbing,Zhao Yishun,Qian Jianxue

2007-01-01

Abstract:This paper represented the principle and solution by which we can manipulate database by means of ActiveX,Microsoft ADO and SQL in LabVIEW environment.At the same time,the paper completed the student managemental system and the program chart which were introduced in the end.In the technological test,the system runs fast,the consumption of memory and hard disk is lower.So it is a perfect way to realize database system.
Development of Distributed On-line Experimental System Based on Virtual Instruments

MING Fan-hua,JIANG Jian-jun,FAN Shao-chun,YANG Biao

2007-01-01

Abstract:Using the parallel and queue technique,a system of online experiment based on LabVIEW software and virtual instruments was designed,and a distributive data shared module of online experimental platform was described.The network lab model which is without time and space between network server and client is benefit for network lab.Furthermore,multi-user and multi-experiment was realized in LAN.
The Design of System for Video Order Program Base on LAN

李莉,冯欣,田迎华

DOI: https://doi.org/10.3969/j.issn.1672-9870.2004.02.022

2004-01-01

Abstract:The design of system for video order program base on LAN is introduced in this paper. How orders program and information in the program database using VOD technique is explained . The user obtains multimedia freely automatically, and chooses video program at will.
Design of Pressure Sensor Data Acquisition System Based on LabVIEW

Xiao-han JIA,Li-qiang GUO,Tao GUO

DOI: https://doi.org/10.3969/j.issn.1002-1841.2016.12.021

2016-01-01

Abstract:According to the external environment influence on the accuracy of data acquisition under water pressure ,a pres-sure sensor data acquisition system was designed .In hardware design,the A/D conversion chip PCF8591 was used on signal,at the same time,chip STC89C52 was used for data acquisition and processing to ensure the accuracy of data sampling and data pro -cessing speed .Computer display interface program was written by LabVIEW graphical programming software , the user interface displays rich and beautiful information .The experimental results show that the data acquisition system has simple structure ,high precision data acquisition ,easy data to read ,friendly interface and other features ,and has great application value .

Design of Data Playback System Based on LabVIEW

Virtual Design of Precision Irrigation Detection System

Labview-Based Virtual Laboratory for Digital Signal Processing

Research on USB Data Transmission Technology Based on LabVIEW

Study on Digital Testing System of SLD Based on LabVIEW

Study of Teledata Acquisition System Based on LabView

Data Transfer Mode for Measurement and Control Software Based on LabVIEW

Design of automatic hydraulic test bench based on LabVIEW

Application of LabVIEW in Acquisition and Processing Software for Large Volume of Data

Design of multi-functional portable electronic experimental box based on Labview and ARM

A Labview-Based, Interactive Virtual Laboratory for Electronic Engineering Education

The Laboratory Management System Based on LabView

Design of virtual digital oscilloscope based on LabVIEW

Design of virtual circuit experiment based on the LabVIEW

Automatic Playback System

Problems and Solutions of LabVIEW Program Flow Control

Design of VI Data Collecting System Using Customized USB Card

Realization of database system based on ADO and SQL in LabVIEW environment

Development of Distributed On-line Experimental System Based on Virtual Instruments

The Design of System for Video Order Program Base on LAN

Design of Pressure Sensor Data Acquisition System Based on LabVIEW