Automatic Playback System

Li-na SHANG,Xin-min X(U)

DOI: https://doi.org/10.3969/j.issn.1002-8684.2005.03.010

2005-01-01

Abstract:The paper introduces the design of an automatic playback system. Based on ISD4004, keyboard, LED and ROM controlled by 89C52, playback can be automatically performed. The process is programmable and labour-saving.

What problem does this paper attempt to address?

Mcu-based Electronic Organ System with Record/playback Function

Li Lintao,Chen Ming,Liang Yiyong,Wang Xiaoping

DOI: https://doi.org/10.19695/j.cnki.cn12-1369.2010.02.008

2010-01-01

Abstract:This paper introduces a multi-functional electronic organ system based on MCS-51 MCU, which has the function of playback, record and play. In the system, two octaves can be inputted using a 8×2 matrix keyboard. And the name of music which is playing or recording can be displayed on the LED nixie tube. Besides, the volume and tone of music score can also be displayed by the creative use of LED array. By the combined use of multiple functions mentioned above, the system can be used as an auxiliary tool in electronic organ learning, as well as a reference example of MCU synthetical application in MCU learning.
Design of a Playback Control System for Flight Parameter Recorder

h y yang,yan chen

DOI: https://doi.org/10.4028/www.scientific.net/AMR.933.370

2014-01-01

Advanced Materials Research

Abstract:A play-back controller was designed for a certain series of aircraft. The XC866 MCU was used as the main controller unit, and an 8051 MCU as the assistant control unit. It achieved the function of channel selection, channel switching, signal filtering, signal decoding and tape speed controlling. Compared with other play-back controllers this instrument is more superior in control precision, reliability, use of flexibility and simple of structure.
The Fully Automatic Introduction Machine Realized by Using ISD2500 Chip

LIU Jin-hua

DOI: https://doi.org/10.3969/j.issn.1009-2714.2006.04.019

2006-01-01

Abstract:Introduced the functional feature of ISD2500 series recording/playing audio chips,and the working principle of fully automatic audio introduction machine designed by using ISD2500 series chips and TX05D infrared reflex switch.
Design and Implementation of Auto-Play System Based on IPTV

Feng Wei,Liu Xinsong

DOI: https://doi.org/10.3969/j.issn.1672-4550.2006.01.019

2006-01-01

Abstract:Along with the development of IPTV technology, more and more IPTV applications are needed. One of them is auto-play system which can play the programs based on the sequence which has been decided before. With this system, we can fulfill the functions of CATV before and increase the flexibility and expansibility.
Design of Data Playback System Based on LabVIEW

刘卓,张维竞,聂鹏瑜

DOI: https://doi.org/10.3969/j.issn.1006-2394.2003.06.005

2003-01-01

Abstract:This paper provides design principle of data playback system based on LabVIEW and some problems which should be cared.
Digital music box design

Chen Ya-xing

Abstract:This paper describes the digital music box designed by the use of AT89C52 microcontroller as control center.The digital music box is developed by SMC technology,passive buzzer as audio output,4×4 keyboard and to realize Schematic and circuit diagram designing,the key-board design of the identification procedures;Furthermore pulse is generated audio output of the design process by C language.Through the hardware and software test.The digital music box can play digital music,you can press keys to choose the previous music and the next one,control music to playback or pause,and can display the currently playing song's name and serial number by 16×02LCD,boot with English welcomed characters.It can play better music,intonation and rhythm is precisely con-trolled by SCM.

Engineering,Computer Science
A Multi-Card and Multi-Channel Data Playback System Based on PCI Bus

Ling Liu,WU Man-qing,Hong Yi

2006-01-01

Abstract:A PCI bus-based multi-channel data playback system is introduced in this paper,including the development of hardware,software,and driving and interface programs.A novel design which combines PCI Core and user logic is adopted.In the hardware design,the clutter module is embedded.In the interface we can choose clutter or not,that is,this will determine that this system replay the original data,or the data with clutter to really simulate radar echo.Finally,the experiment results are given,and the results show that the system is of good performance.
Design on Automatic Generation System of Multimedia Files

Ji Yujie,Zhang Zhongneng

DOI: https://doi.org/10.3969/j.issn.1007-757X.2013.08.008

2013-01-01

Abstract:At present,with the rapid development of network and multimedia technology,various information of program playing in the form of multimedia can be seen everywhere.Using multimedia player has advantages of the more information,vivid performance and timely updates.This paper designs and implements an automatic generation system based on webpage preview,using Web Service,FTP and Java multi-thread technology.Users can design program templates,add program contents optionally and have authorities to manage terminals.The system has been put into use and greatly reduces the generation time of multimedia files.
Design and Implementation of Music Enjoyment Digital Music Box Based on Single Chip Microcomputer Control

Y. Yan

2018-12-18

Abstract:With the development of human society, people put forward higher and higher requirements for the enjoyment of vision and hearing. A little music box can bring good memories to people and enhance people's spiritual and cultural enjoyment. The traditional music box is mostly mechanical, cumbersome and monotonous, and cannot achieve mass production. This design is a digital music box based on AT89C51 Series MCU. The music box is mainly composed of key circuit, reset circuit, clock circuit, display circuit and buzzer. Four keys are used to control the music box, two of which are used to control the playback and pause of songs, and the other two are used to control the change of song order on the LCD. When playing the song, the corresponding song corresponds to the song sequence and song name display on the corresponding digital tube. Finally, Proteus Software is used to simulate the design system and test whether the function of the system can be implemented normally.

Engineering,Computer Science
A digital audio recording and playing system based on XC3S1000 FPGA

PANG Wei,WANG Jian-gang,WANG Chao-yang,JIANG Hai-feng,WANG Ming-jiang

DOI: https://doi.org/10.3969/j.issn.1673-825X.2007.z1.021

2007-01-01

Abstract:ADPCM is a utility coding technique, which plays an important role in audio coding theory. ADPCM coding technique adopts backward adaptive high order predictor, and refreshes predict coefficients by notation grads method. The system in this article is compiled with Verilog HDL, it worked under emulation, synthesis and implement, then the system was downloading into XC3S1000FPGA which is produced by XILINX company. This system accomplish digit recording and playing successfully. The design had been convinced to have good audio quality.
Design and Implement of an Embedded MP3 Audio-on-demand System

伍兴艳,皮亦鸣

2008-01-01

Abstract:This paper introduces the design of C/S structure audio-on-demand system based on S3C2410 processor and embedded Linux operation system.The MP3 audio files are collected and stored in net FTP server or local USB memory,and used MP3 play to audio on demand.The design of embedded MP3 play based on Mini-Gui is presented.This paper provides the system structure,the hardware and software design circuit.This system can be widely used in many locations such as KTV and audio classroom.
Development of the Automatic Sssembly System for Car's Latch Based on Programmable Logic Controller

YAN Wen-jun,TU Fu-qi,ZHU Yi-qiang

DOI: https://doi.org/10.3969/j.issn.1001-4551.2000.03.034

2000-01-01

Abstract:The paper introduces the structure and the principle of the automatic assembly system for car's latch pieces based on Omron's programmable logic controller and it's designing method. The device can be used to assembly single or double latch piece. Also the software algorithm and the hardware configuration are provided.
Design of Control System of Loom Machine Based on ARM

CHI Zhe-gui,LIU He-jin,ZHANG Sen-lin

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.11.005

2005-01-01

Abstract:Based on the reliable function and simple design,taking good advantages of the advanced controller and control technology,a loom machine system design based on ARM is presented in this paper,which uses S3CEV40 of EMBEST Company as a centre part and functional models as periphery,making up of the hardware part and composed according to the technical procedure.The IO expandance based on CPLD make the whole system flexible and powerful.Motor driver module is another major component of this system.It adopts ARM chip-based frequency vector control strategy.In software,it servo controls motor in interrupt mode.It is turned out to be reliable in function and simple in implement by practice.
The Automatic Control System for Transfer Printer Based on P89C668

Li You

2005-01-01

Abstract:Presents the control system for rubber tyre transfer printer based on P89C668.It describes the idea and method of the system design in particular.The function and the configuration of hardware and software is given.In the printing process,it uses FuzzyPID arithmetic on temperature of nonlinear control,and adopts double closed loop AC regulatioin speed system on controlling two motor.
Control System of Intelligent Appliances Based on Voice

Xun LV,Yang-fu JIN,Gan LI

DOI: https://doi.org/10.3969/j.issn.1005-2895.2008.02.018

2008-01-01

Abstract:This paper introduces a voice control system for intelligent appliances.Sunplus 16 microcontroller SPCE061A is utilized for the hardware system,and voice input and output peripheral circuits are also designed.The software system adopts special speaker voice recognition.When the environment is not too noisy,voice recognition accuracy is quite high in controlling lighting system,electric fan and TV ect.appliances.
Design and Implementation of Automatic Control System for Intelligent Water Dispenser

Bing Li,Jinghong Ji

DOI: https://doi.org/10.1088/1742-6596/2074/1/012019

2021-11-01

Journal of Physics: Conference Series

Abstract:Abstract In this paper, an intelligent water dispenser automatic control system is designed by using a microcontroller as the core. Relevant signals are collected through temperature sensor, liquid level sensor and other sensors, then send them to the microcontroller for processing and control, and use the liquid crystal display for display. Temperature, effluent and liquid level can be controlled according to their own needs, so as to realize the intelligent control of the water dispenser. The intelligent water dispenser automatic control system designed in this paper has low hardware cost and easy operation in the use process.
Electronic music box design

Wanghui Zeng,Guoping You

DOI: https://doi.org/10.1109/COMPCOMM.2016.7924848

2016-10-01

Abstract:This paper describes the design of multi-functional electronic music box with buttons using STC89C52 micro-controller as the core. Not only it can play music, but also switch for manual play using the button. The design is compact and lightweight, beautiful and versatile, so it has a certain application value and commercial value.

Engineering,Computer Science
Design and realization of the indoor lighting automatic control system

Rui-qiong LIU,Wen-li ZHANG

DOI: https://doi.org/10.3969/j.issn.1674-6236.2018.09.023

2018-01-01

Abstract:To avoid the huge waste of electric power and to achieve the purpose of environmental protection,This design of indoor lighting automatic control system can be realize the automatic control of lighting system with the AT89C52 as the intelligent control component,pyroelectric infrared sensor to detect the persons number,using photosensitive module to test indoor light intensity and 1088 BHG LED dot matrix simulation indoor lighting.In this paper,the system adjust the indoor lights reasonablely through the existence of the signal for the human body and the ambient light signal.In addition,it is also necessary to extend its ability in the special needs of manual control mode and the alarm circuit to enhance the system performance.This system is small in size,low cost,high performance-to-price ratio, control convenience,high reliability and energy saving,also has strong application value.
Implementation of Digital Broadcast System on Passenger Train

Liu Ming

DOI: https://doi.org/10.4028/www.scientific.net/amr.271-273.1904

2011-01-01

Advanced Materials Research

Abstract:Instead of traditional mechanical tape , A new type digital broadcast system on passenger train is introduced, It adopt the microcontroller technology and MP3 decoder method ,complete the whole function of broadcast system. The design of hardware and software is described. Its application in the broadcast system is also introduced. The system has been produced on a small scale. Its implementation in a passenger train is successful and effective.
A Design of Intelligent Car Based on STC89S52 Single Chip Microcomputer

Yan Quan Wang,Gang Wang

DOI: https://doi.org/10.4028/www.scientific.net/amm.246-247.666

2012-12-01

Applied Mechanics and Materials

Abstract:With the development of production automation and science and technology level, the intelligent level of the car is continuously improved. For intelligent car, with STC89S52 single chip microcomputer as its core of control, the direction and speed of it is controlled by the collection and processing of the signals from various kinds of transducers in the forward path. Therefore, the functions of automatic identification of black guide line applied to rapid and steady running status of the car and the obstacle color discrimination applied to direction selection during the course of running and other relevant functions can be realized. In this system, a DC motor is used for the forward and steering movement of the car, a LCD1602 is used for the display of its travel time, and a dual power supply by which system stability can be enhanced is used for the motor and control system respectively. Besides, the system control software is designed to be a combination of software and hardware, through which the anticipated functions of the car is ultimately realized.

English Else

Automatic Playback System

Mcu-based Electronic Organ System with Record/playback Function

Design of a Playback Control System for Flight Parameter Recorder

The Fully Automatic Introduction Machine Realized by Using ISD2500 Chip

Design and Implementation of Auto-Play System Based on IPTV

Design of Data Playback System Based on LabVIEW

Digital music box design

A Multi-Card and Multi-Channel Data Playback System Based on PCI Bus

Design on Automatic Generation System of Multimedia Files

Design and Implementation of Music Enjoyment Digital Music Box Based on Single Chip Microcomputer Control

A digital audio recording and playing system based on XC3S1000 FPGA

Design and Implement of an Embedded MP3 Audio-on-demand System

Development of the Automatic Sssembly System for Car's Latch Based on Programmable Logic Controller

Design of Control System of Loom Machine Based on ARM

The Automatic Control System for Transfer Printer Based on P89C668

Control System of Intelligent Appliances Based on Voice

Design and Implementation of Automatic Control System for Intelligent Water Dispenser

Electronic music box design

Design and realization of the indoor lighting automatic control system

Implementation of Digital Broadcast System on Passenger Train

A Design of Intelligent Car Based on STC89S52 Single Chip Microcomputer