Abstract:Vibration of AC filter capacitor generates loud noises in HVDC converter stations, which would reach 105dB. Currently, vibration features are not investigated thoroughly. The objective of this work was to measure vibration velocity distribution on AC filter capacitor surfaces and to investigate the vibration features. In the experiments, the capacitor was applied currents consist of three components of 50 Hz, 550 Hz and 650 Hz. The root mean squared values were 30 A, 25 A and 4.6 A, respectively. A portable digital vibrometer was conducted to measure the vibration velocity on capacitor surfaces. In order to obtain velocity data simultaneously, voltage squared was used as a datum signal to calibrate the time offset. It was found that velocities on different measure points on a capacitor surface were not synchronous, and had different phases. On the bottom surface, vibrations performed entirely transverse oscillating. On the broad side surfaces, there were two bending wave generated from the edges connected to bottom and top surfaces. It was concluded that the internal vibration of elements excited firstly on the bottom surface, and then through the edges of bottom and broad side surface, it transmitted on broad side surfaces. A damping structure was designed and applied on the bottom surface to increase the damping coefficient between contact surfaces and to reduce vibration transmitted to broad side surfaces. The sound measurement result shown that the damp-structure capacitor had sound power which was 73.3% of that generated from the conventional capacitor.

Dynamic Simulation and Optimization Design on Tower Structure of UHV DC Filter Capacitor

Stability Analysis of the AC Filter Capacitor Structure

Electric Field Calculation and Optimization of Shielding Device for Filter Capacitor Tower in ± 1100kV Indoor DC Yard

Feasibility study of anti-strong-wind cable-tower structure

Simulation Analysis and Improvement Design of Electric Field Distribution for Shielding Device in UHV Converter Station Indoor DC Yard

Dynamic analysis and optimization of a wind turbine tower subject to wind and earthquake loads

Study on overvoltage and insulation coordination of DC filter for ±800 kV UHVDC project from Xiangjiaba to Shanghai

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

Bayesian Operational Modal Analysis with Interactive Optimization for Model Updating of Large-Size UHV Transmission Towers

Vibration Analysis of Power Capcitors and Vibration Reduction with Damping Structures

Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings

Simulation and optimization design of tower structure of wind generating set

Electric Field Computation and Optimization of Composite Tower in 330 Kv Double Circuit Transmission Lines

Experimental and Computational Simulation for Wind Effects on the Zhoushan Transmission Towers

Study on the dynamic mechanical properties of winding‐block axial structure considering short circuit strain rate effect

Wind-Induced Coupling Vibration Effects of High-Voltage Transmission Tower-Line Systems

Electrical field calculation and optimization of suspension insulator with cone conformation in valve hall

Simulation and Optimization Design of Isolating Switch in the Indoor DC Yard of ±1100kv Converter Station

Modeling of Acoustic Emission Generated by Filter Capacitors in HVDC Converter Station

Optimization Design for 500 kV Four-Circuit Transmission Lines on Same Tower

Model-Based Design and Optimization of Hybrid DC-Link Capacitor Banks