Abstract:In order to achieve a more intensive understanding of the forming mechanism of the fine-blanking process, a numerical simulation has been carried out by using a mixed displacement/pressure (u/p) finite element method. According to the special requirement of the fine-blanking technique, the major process attributes, such as the vee-ring, the ejector and the edge radii of tools, have been taken into account in the finite element model. The punch–die clearance was set to 0.5% of the thickness of the workpiece. To verify the effectiveness of the simulation, the equivalent strain on the sheared surface of a SS400 steel specimen has been determined experimentally. The experimental values of the equivalent strain have been estimated by measuring the relative displacements of the local grids pre-etched on the meridian plane of the specimen. The results of the finite element simulation are in proper agreement with the experimental findings. The distributions of the shear stress and the equivalent plastic strain have been computed for discussion. Moreover, a diagram of the blanking force versus the punch penetration has also been constructed. In order to investigate the fracture mechanism in the fine-blanking process, the concept of damage mechanics has been applied. By using a void growth model, the evolution of damage at different stages of the fine-blanking has been evaluated. It has been realized that the compressive hydrostatic stress built up by the fine-blanking fixture plays an important role to suppress the initiation of macrocracks.

Numerical Simulation on Reciprocated Fine Blanking Process

Numerical Simulation of Fine-Blanking Shaping and Fracture of AISI-1035 Steel

Numerical simulation and optimization of process parameters in fineblanking process

Finite Element Simulation For Blanking Process Of Sheet Metal

Numerical Simulation on Edge Crack of Advanced High-Strength Steel Considering Blanking Induced Damage

Numerical Simulation of Recrystallization and Grain Growth Evolutions During Metal Forming Processes

Numerical simulation of fine-blanking process using a mixed finite element method

Advances in Forming Simulation for Fine-Blanking Process

Numerical Simulation of Isothermal Forging Process of MB26 Magnesium Alloy

Ductile Damage and Simulation of Fine-Blanking Process by FEM

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

NUMERICAL SIMULATION OF DYNAMIC DECRYSTALLIZATION DURING HOT FORGING

Numerical Simulation of Sheet Metal Blanking Based on Fully Coupled Elastoplasticity-Damage Constitutive Equations Accounting for Yield Surface Distortion-Induced Anisotropy

Numerical simulation of microstructure evolution of flange axle during hot forging

Numerical Simulation of Microstructure Evolution for SA508-3 Steel During Inhomogeneous Hot Deformation Process

Numerical Simulation of Electromagnetically Assisted Sheet Metal Stamping for Cylindrical Deep Drawing

AN OVERALL NUMERICAL SIMULATION OF HOT METAL FORMING

Numerical simulation of casting-forging integrated breakdown process

Research on Plastic Deformation Behavior of Double Rollers Clamping Sheet Metal Spinning Process

Finite Element Simulation of Two Stroke Deep Drawing in Sheet Metal Forming

The Numerical Simulation and Failure Prediction for Thick Sheet Metal Fine-Blanking Based on Oyane Damage and Fracture Model