Abstract:NH4Cl corrosion failure often occurs in the overhead systems of hydrotreaters, and this failure is always accompanied by the appearance of H2S. A combination of electrochemical and surface spectroscopic (SEM/EDS, AFM, XRD) techniques was used to investigate the effect of different factors, including the surface roughness, temperature, dissolved oxygen, pH and H2S concentration, on the corrosion behavior of carbon steel in an NH4Cl environment with the presence of H2S. The effect of H2S concentrations (at the ppm level) on the corrosion behavior of carbon steel was systematically revealed. The experimental results clearly indicated that the corrosion rate reached a minimum value at 10 ppm H2S. The steel surface was covered by a uniform corrosion product film in a 10 ppm H2S environment, and the corrosion product film was tight and protective. The ammonia from NH4Cl helped maintaining the protectiveness of the corrosion films in this environment. Dissolved oxygen mainly accelerated the cathodic reaction. The cathodic limiting current density increased with increasing temperature, and the anodic branch polarization curves were similar at different temperatures. The anodic current density decreased as the pH decreased, and the cathodic current density increased as the pH decreased. The absolute surface roughness (R (a)) of carbon steel increased from 132.856 nm at 72 h to 153.973 nm at 144 h, and the rougher surface resulted in a higher corrosion rate. The critical innovation in this research was that multiple influential factors were revealed in the NH4Cl environment with the presence of H2S.

Effect of acetic acid on corrosion of P110 oil tube steel in H2S environment

The pitting research of 2205 duplex stainless steel in acetic acid environments

Influence of S on Corrosion Film of P110 Steel in S+CO2 Oilfield

Corrosion of N80 carbon steel in oil field formation water containing CO 2 in the absence and presence of acetic acid

Corrosion Behavior of AISI316L and SAF2205 Stainless Steels in Acetic Acid Solution Containing Br Ion

Study on corrosion behavior of P110S steel in CO2-H2S- saturated solution

Effects of Acetic Acid on the Initiation of Pitting Corrosion and Stress Corrosion Cracking on Low-Alloy Steel in pH Buffer Solutions

Influence of HAc Concentration and Temperature on the Electrochemical Corrosion Behavior of Super 13Cr Stainless Steel

Study on corrosion behavior of AISI316L and SAF2205 stainless steels in acetic acid solution containing Br-ion

Corrosion Behavior of Stainless Steels and Nickel-Based Alloys in Acetic Acid Solutions Containing Bromide Ions

Enhanced corrosion of 2205 duplex stainless steel by Acetobacter aceti through synergistic electron transfer and organic acids acceleration

Effect of Temperature on CO2/H2S Corrosion Rate of Oil Tube Steels

Effect of carbon dioxide on corrosion of tubular steel in high hydrogen sulfide and carbon dioxide environments

Effect of Flow Rate on the Corrosion Behavior of P110 Steel in High-Ca2+ and High-Cl− Environment

Corrosion Behavior of Tubing in High-Salinity Formation Water Environment Containing H2S/CO2 in Yingzhong Block

The effect of acidification on hydrogen uptake and corrosion resistance of advanced high-strength steels

Research of Co2 Corrosion Behavior of 20(#) Steel in Gas Well Solution Containing Formic Acid

Effects of Different Cathodic Reactions on Tribocorrosion Behavior of AISI 430 in 0.5 mol/L Sulfuric Acid

A Study on the Corrosion Behavior of Carbon Steel Exposed to a H2S-Containing NH4Cl Medium

Corrosion Behavior of AISI 316L Stainless Steel in a Highly Sour Environment

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure