Abstract:Functional gradient materials (FGM), with their composition gradually varied in different positions, have attracted much attention for research and development during the years. Normally there are two types of functional gradient materials: one without the formation of intermetallics which is easier for fabrication due to less scientific and technological challenge; the other one with the formation of intermetallics in some part of the gradient changed composition range such as Ti-Al, Ti-Fe, Ni-Al gradient materials, which still exists big challenge on intermetallic, resulting in high brittleness and unavailability.Laser deposition is a competitive candidate for FGM due to its capability on accurate composition and precise dimension control. According to an aeronautical application requirement to gradually change the composition from Ti6Al4V to 316L, this paper reports on laser deposition of Ti6Al4V to 316L gradient composition structure. A big challenge is the formation of the TiFe intermetallic especially near the composition of Ti50Fe50, which results in very high cracking tendency. Many efforts have been made to optimize the Ti-Fe composition ratio, the deposition process and the deposition parameters, not a single Ti6Al4V-316L composition gradient structure was successful due to the formation of the very brittle TiFe and TiFe2 intermetallics. This indicates that it is almost impossible to direct deposit Ti6Al4V to 316L without cracking and separation. We used Inconel 625 powder as an interlayer between the Ti6Al4V and the 316L, thus a sound Ti6Al4V-316L composition gradient structure was successfully achieved by laser deposition. The brittle TiFe and TiFe2 intermetallics were replaced by a series of phase evolutions: α+β → β+Ti2Ni→Ti2Ni+TiNi→TiNi→TiNi+TiNi3→Ni3Fe→ Ni2Fe3→γFe. The brittleness was dramatically decreased or diluted and crack-free composition gradient structure was available. The gradient structure was further analyzed on hardness, microstructural evolution, the Young's modulus and Poisson's ratio.

THERMAL STRESS MODEL FOR FUNCTIONAL GRADIENT MATERIAL OF Ti6AI4V/DLC ARTIFICIAL HEART VALVE

An Approach for Designing Patient-Specific Prosthetic Aortic Valves Based on CTA Images Using Fluid-Structure Interaction (FSI) Method.

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

Recent Progress in Biomaterials for Heart Valve Replacement: Structure, Function, and Biomimetic Design

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Thermal stress simulation in TiB2-Cu functionally graded materials

ELASTOPLASTIC OPTIMUM DESIGN OF Ni/TiC FUNCTIONAL GRADIENT MATERIAL

Experimental Analysis for Thermal Stress in Functionally Gradient Material

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Laser Deposition of Ti6Al4V-316L Composition Gradient Structure: Challenge on Intermetallics

Finite Element Simulation of Residual Stress in Laser Additive Manufactured Functionally Gradient Materials Based on Bessel Heat Source Model

COMBUSTION SYNTHESIS AND THERMAL STRESS ANALYSIS OF TIC-NI FGM

Residual Stress Analysis of Functionally Gradient Materials

Fretting fatigue crack initiation and propagation behaviours of Ti6Al4V alloy coated by functionally graded material

Comparing Internal Stress in Diamond-Like Carbon Films with Different Structure

Design of Functionally Graded Ti–Al Alloy with Adjustable Mechanical Properties: a Molecular Dynamics Insights

Effect of the direction of the gradient on the mechanical properties and energy absorption of additive manufactured Ti-6Al-4 V functionally graded lattice structures

Research on the microstructure and mechanical properties of functional gradient materials of TC4/TC11 titanium alloys for wire arc additive manufacturing with different transitional forms

Optimum design of W/Cu functionally graded material for thermal stress mitigation

Constitutive Modeling on the Ti-6Al-4V Alloy during Air Cooling and Application