Abstract:This research aimed to predict the residual stress of additively manufactured rectangular specimen using Selective Laser Melting (SLM) by means of non-linear numerical computation based on Thermo-mechanical method (TMM). The procedure starts with the geometrical and material modelling of rectangular specimen with regards to Austenitic Stainless Steel 316L (SS316L) in which the temperature dependent material data properties such as Young’s Modulus, Thermal Expansion Coefficient, Specific Heat Capacity and Thermal Conductivity are taken into account. The next phase consists of numerical computation procedure which is where the specimen is position 60° of inclination angle from the substrate plate. The support structure is to be generated within the lower surface of the specimen in order to avoid material to collapse during printing process. Laser heat source is to be modelled based on the laser beam width, power, efficiency and scanning speed in order for the numerical computation to accurately predict the thermal problem in SLM process. Furthermore, layer parameters used to fabricate the specimen such as hatch distance, hatch scan width and layer thickness are taken into TMM consideration. Similar set-up from numerical computation by means of laser and layer parameters to fabricate SS316L rectangular specimen is utilized in real fabrication process using SLM machine, Renishaw RenAM 500E. After fabrication of the specimen, electropolishing as for the sample preparation for X-Ray Diffraction (XRD) measurement are to be conducted by means of various depth on both sides of the specimen. For the validation procedure, residual stress on every depth is to be analysed and compared with the result from numerical computation. In conclusion, TMM simulation forecasting an acceptable residual stress on SLM product with relative error up to 14% and the computational time taken to predict the residual stress is only 56 minutes. This exploratory research using TMM simulation to predict residual stress on SLM product could benefit metal additive manufacturing (MAM) production as a whole by neglecting expensive trial and error approach.

Finite Element Simulation of Residual Stress in Laser Additive Manufactured Functionally Gradient Materials Based on Bessel Heat Source Model

Finite element analysis for residual stress of TC4/Inconel718 functionally gradient materials produced by laser additive manufacturing

Residual stress analysis of TC4/Inconel718 functionally graded material produced by laser additive manufacturing based on progressive activation element method

Finite Element Simulation of the Laser Additive Manufacturing

Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition

Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling

Efficient prediction of residual stress in additive manufacturing based on semi-analytical solution

Multiscale framework for prediction of residual stress in additively manufactured functionally graded material

Numerical Analysis of the Effect of the Spatial and Temporal Scanning Strategies on the Residual Stress in the Multi-Laser Powder Bed Fusion of Ti-6Al-4V

Numerical Simulation of Stress Evolution of Thin-Wall Titanium Parts Fabricated by Selective Laser Melting

Effect of residual stress on mechanical properties of Triply periodic minimal surface lattice structures in Additive manufacturing

Residual stresses and deformations of laser additive manufactured metal parts: a review

Residual Stress Generation in Additive Manufacturing of Complex Lattice Geometries

Crystal plasticity model of residual stress in additive manufacturing

Effect of Forged Substrate Geometry on Temperature and Stress Field in Additive Manufacturing

Numerical Studies of Residual States and Scaling Effects in Laser-Directed Energy Deposition Additive Manufacturing

Residual Stress Measurements on Rectangular Specimen SS316L using Numerical Computation Software and Selective Laser Melting

In-situ control of residual stress and its distribution in a titanium alloy additively manufactured by laser powder bed fusion

Understanding the strain localization in additively manufactured materials: Micro-scale tensile tests and crystal plasticity modeling

High-Resolution Inherent Strain Method Using Actual Layer Thickness in Laser Powder Bed Fusion Additive Manufacturing with Experimental Validations

Analysis of the Residual Stress in Additive Manufacturing of Ti-6Al-4V