Abstract:This research describes numerical and experimental studies on the co-combustion characteristics of hydrothermally treated municipal solid waste (HT MSW) with coal by utilizing a bubbling fluidized bed (BFB) reactor. The developed model is supported by some experimental test on co-combustion of coal with HT MSW to simulate the combustion process in a BFB and to evaluate the possibility of co-combustion application in a BFB reactor with different MSW blending ratios. HT MSW mixing ratios of 10, 20, 30, and 50% are chosen and examined at 700, 800, and 900°C to determine at which temperature coal could be substituted with the HT MSW regarding emissions, such as CO, SO2 and HCl. Emissions of NO, N2O, NH3 and HCN from the mixtures are measured, simulated, and contrasted with the results of only combustion of coal. Hydrodynamics and heat and mass transfer, along with reactions during combustion, e.g., coal/waste devolatilization, volatile combustion and char combustion, are taken into account. The results obtained in this part of the study ensure the possibility of accepting the mixing ratio of the hydrothermally treated MSW, co-combusted with coal up to 30% (wt.%) without major modification of the coal-fired BFB reactor. The simulation results are compared with experimental data, which show that the gas species versus time at different heights from the fluidized bed is reasonably simulated. This indicates that the numerical model presented is valid and provides a promising way to simulate the combustion of solid waste in a BFB, which is the predominant technology for co-combustion of waste. The advantage of the theoretical study lies in its ability to reveal features of the detailed structure of the combustion process inside a solid bed.

Experimental Research on Co-Combustion of Waste Plastic & Coal in Fluidized Bed

STUDY ON ELIMINATING FIRE-CARRYING IN PRIMARY AIR JET ORIFICE BY ADMIXING EXHAUST GAS

Experimental Research on Fluidized Bed Combustion of Typical Municipal Solid Waste Components

Experimental Research of Pipe-Distributed MSW Fluidized Bed Incinerator

Co-combustion of oily sludge and coal in fluidized bed

Research on the Emissions of Harmful Gas in Fluidized Bed During MSW Combustion

Study on co-melting injection technology of coal and waste plastic

Experimental Study on Desulfurization in Fluidized Bed Combustion of Coal Sludge

Study on dioxin emission from plastic and coal Co-combustion in a fluidized bed

Experiment study on pollutant emission of RDF incineration in fluidized bed

Basic Research and Industry Application of Fluidized Bed Mixing Combustion by Using the Slime and Refuse Mixture

The Performance Practice of 200t/d Municipal Solid Wastes, Papermaking Wastes Co-Fired Fluidized Bed Incinerator

CO-FIRING MSW WITH COAL IN FLUIDIZED INCINERATOR AND POLLUTANT EMISSION CHARACTERISTICS THEREOF

Pilot test of heat transfer in solid waste control oxygen

Experimental Study on Gasification Characteristics of Wood in a Fluidized Bed

Experimental Research on Oil Sludge Fluidized Bed Incineration

Study On Sewage Sludge Fluidized Bed Incineration And Design Of 65t/D Incinerator

Features of PAH Formation in Co-fired Combustion of Plastics and Coal on Small Sized Fluidized Beds

Numerical and Experimental Investigation on Co-Combustion Characteristics of Hydrothermally Treated Municipal Solid Waste with Coal in a Fluidized Bed

Experimental Investigation on Co-firing of Coal and Refuse-derived Fuel in a Pilot-scale Circulating Fluidized Bed Combustor

Numerical investigation of waste plastic injection in a blast furnace