Abstract:As the volume of oil extraction continues to rise, the issue of oilfield wastewater treatment has become increasingly urgent. Traditional water treatment technologies struggle to effectively and economically eliminate the pollution caused by oilfield wastewater, as well as efficiently utilize its various components. This study proposes the utilization of oilfield wastewater for the preparation of coal water slurry, and the combustion experiments of coal oilfield wastewater slurry (COWS) and original coal water slurry (CWS) under various working conditions are conducted on a pilot-scale horizontal furnace. The investigation focused on the combustion characteristics, slagging characteristics and flue gas composition, as these indicators directly impact the industrial application of such slurry fuel. The combustion characteristics results reveal that both COWS and CWS demonstrate stable ignition and combustion across all working conditions, with combustion efficiency exceeding 99.69%, and the incorporation of oilfield wastewater promotes volatiles precipitation and combustion. The slagging characteristics results indicate that the flame temperature within the furnace is critical in determining slagging occurrence, and the incorporation of oilfield wastewater increases the likelihood of slagging. The flue gas composition measurement results indicate that the incorporation of oilfield wastewater slightly elevates carbon monoxide (CO) levels, albeit within a low concentration range. Additionally, oilfield wastewater demonstrates a modest reduction in sulfur dioxide (SO2) and nitrogen oxide (NOx) emissions. These test results underscore that incorporating oilfield wastewater into the preparation of fuel coal water slurry not only facilitates thorough treatment of oilfield wastewater, but also enhance the combustion performance of slurry fuel within the furnace, thereby offering significant industrial application potential.

Basic Research and Industry Application of Fluidized Bed Mixing Combustion by Using the Slime and Refuse Mixture

Examination of Industrial Demonstration Unit of Coal Gasification for Pulverized Coal with Ash Agglomeration Technique

Experimental study of sludge disposal in a large coal-fired power plant

Co-Combustion Characteristics of Municipal Sewage Sludge and Coal in a Lab-Scale Fluidized Bed Furnace

Application and Development of Washary Tailings Fluidized Bed Combustion Technology

CO-FIRING MSW WITH COAL IN FLUIDIZED INCINERATOR AND POLLUTANT EMISSION CHARACTERISTICS THEREOF

A Study of Circulating Fluidized Bed Combustion Test of Lignite Coal Washery Tailing Slurry of Indonesia

Co-combustion of oily sludge and coal in fluidized bed

Research on the Emissions of Harmful Gas in Fluidized Bed During MSW Combustion

99/00595 Experimental study and design considerations for co-firing paper mill sludge in CFB boiler

Co-Combustion of Tannery Sludge in a Bench-Scale Fluidized-Bed Combustor: Gaseous Emissions and Cr Distribution and Speciation

Field Test and Numerical Simulation for Co-combustion of Sludge in a 100,MW Coal Fired Boiler

A pilot scale test on the fluidized melting combustion of coal gasification fine slag

Pilot-scale Study on Combustion Characteristics, Slagging Characteristics and Flue Gas Composition of Coal Oilfield Wastewater Slurry

EXPERIMENTAL STUDY ON FLUIDIZED BED AGGLOMERATION COMBUSTION USING FLY-ASH SLURRY WITH HIGH CARBON CONTENT AND COAL-WATER MIXTURE AS FUELS

ICOPE-15-C083 Study of Numerical Simulation and Field Test for Co-Combustion of Sewage Sludge on a 100 MW Coal Fired Boiler

Experimental Investigation on Co-firing of Coal and Refuse-derived Fuel in a Pilot-scale Circulating Fluidized Bed Combustor

High-Temperature Ash Melting and Fluidity Behavior upon the Cocombustion of Sewage Sludge and Coal

97/04009 A low emission technology—low cost coal water mixture fired fluidized bed combustion

Co-combustion of Tannery Sludge in a Commercial Circulating Fluidized Bed Boiler.

Combustion of Sludge Coal Water Slurry and Emission Property of Contaminants