Abstract:Moisture condensation may cause degradation of key motor components when a motor is de-energized. To prevent moisture condensation, a motor's temperature must be maintained higher than the ambient temperature when de-energized. This paper proposes a non-intrusive motor heating technique using soft-starters. By controlling the operation of the solid-state switches in soft-starters, adjustable ac current can be injected into the three phases of the stator windings without inducing any output torque. The motor temperature can therefore be maintained at a desired temperature due to the heat dissipation during current injection. In addition, two motor temperature control approaches are proposed in this paper to minimize the required energy consumption for preventing moisture condensation. The proposed technique is experimentally validated on a 7.5-hp ODP (open drip proof) induction motor. The experimental results show that the average stator winding temperature can reaches 9° above the ambient temperature with acceptable current magnitudes. In addition, it is shown that the motor temperature rise can be controlled by adjusting the operation of the solid-state switches in soft-starters. The importance of the proposed technique lies in its non-invasive nature: the technique only uses the existing hardware of soft-starters; the motor's condition is not interrupted since no output torque is induced during the current injection. The proposed winding heating technique can be easily extended to other types of ac machines or inverter-fed applications.

Researchof High Voltage Motor Soft-Start Technology

Soft Starting High-Voltage Induction Motors with the Optimum Performance

A Novel Coupled Auto-transformer and Magnetic Control Soft Starter for Super Large Capacity High Voltage Motor

Research of V/f Control Method for Multiphase Induction Motor with Non-sinusoidal Supply at Low Speed

Research on System of Self-Controlled Soft Start with Variable Frequency for Synchronous Motor

A Non-Intrusive Winding Heating Method for Induction Motor Using Soft-Starter for Preventing Moisture Condensation

A NOVEL SOFT STARTER FOR INDUCTION MOTORS BASED ON SELF-COMMUTATED SWITCHES

Technology of Asynchronous Motor Soft Starter and Simulation Research for Torque Control Strategy

Effect of Sudden Increase of Dynamic Loads on Voltage Stability

Experiment and Analysis of High Power Line-Start Pm Motor

A Novel Induction Motor Soft Starter With Torque Pulsations Elimination Capability

Research and Simulation of SCR Soft-Start Asynchronous Motor

Soft Start Control of Large-Capacity Synchronous Motor

Design induction machines' controller in soft-start based on neural networks

Torque Close-Loop Control Of A Novel Soft Starter Of Induction Motor

RESEARCH ON DISPLACEMENT ANGLE IN THE CONTROL SYSTEM OF MOTOR SOFT STARTER

Research on Soft Starting Control Strategy for LCI-fed Synchronous Motor

Analysis of a novel topology of soft starter for induction motors

Soft-starter of Asynchronous Motor Based on Power Factor Closed-loop Control

Research on Starting Strategies in the Three-Level High Voltage High Power Inverters

Application of Fuzzy Control Theory to the Soft Starting of Induction Motor