Abstract:The thermal characteristics of de-energized AC motors are largely different from those of operating AC motors. The conventional thermal protection techniques are not capable of providing reliable thermal protection for AC motors operated with intermittent periodic duty cycles. This paper proposes a non-intrusive stator winding resistance and temperature estimation technique for soft-starter-connected AC motors with intermittent periodic duty cycles. By changing the operation of the solid-state power switches in the soft-starter, a DC signal can be intermittently injected into the AC motor when de-energized, with no output torque induced. The stator winding resistance and temperature can therefore be monitored based on the DC model of ac motors, when the motors are de-energized. Based on the monitoring of the stator winding temperature, the required thermal recovery time can be accurately estimated, which can greatly reduce the required time of each operating cycle and improve the efficiency of the industrial process. The proposed technique is validated through experimental testing on a 7.5-hp induction motor. The error in the stator temperature estimation can be within 5degC. Using the proposed stator temperature estimation technique, for ac motors operated under intermittent periodic duty cycles, the thermal recovery time can be reduced by 45% with the overall efficiency of the motor system increased by 70%, compared to the stator temperature estimation techniques used in conventional thermal relays. The importance of the proposed technique lies in its non-intrusive nature: only voltage and current measurements are needed; the motor's operating condition is not interrupted.

Soft Starting High-Voltage Induction Motors with the Optimum Performance

Researchof High Voltage Motor Soft-Start Technology

A NOVEL SOFT STARTER FOR INDUCTION MOTORS BASED ON SELF-COMMUTATED SWITCHES

A Novel Induction Motor Soft Starter With Torque Pulsations Elimination Capability

Research and Simulation of SCR Soft-Start Asynchronous Motor

Torque Close-Loop Control Of A Novel Soft Starter Of Induction Motor

Study of Soft Starting Controller with High Performance and Low Cost

CONTROL STRATEGY OF MINIMUM TORQUE PULSATION FOR A NOVEL SOFT STARTER OF INDUCTION MOTORS

A Non-Intrusive Winding Heating Method for Induction Motor Using Soft-Starter for Preventing Moisture Condensation

A novel power quality improved AC voltage controller for soft starting of squirrel cage induction motors

Soft Start Control of Large-Capacity Synchronous Motor

Research on Soft Starting Control Strategy for LCI-fed Synchronous Motor

Research on System of Self-Controlled Soft Start with Variable Frequency for Synchronous Motor

Design induction machines' controller in soft-start based on neural networks

A Novel Coupled Auto-transformer and Magnetic Control Soft Starter for Super Large Capacity High Voltage Motor

RESEARCH ON DISPLACEMENT ANGLE IN THE CONTROL SYSTEM OF MOTOR SOFT STARTER

Analysis of a novel topology of soft starter for induction motors

Improving Thermal Recovery Time for Soft-Starter-Connected AC Motors with Intermittent Periodic Duty Cycles

Technology of Asynchronous Motor Soft Starter and Simulation Research for Torque Control Strategy

Fault Diagnosis and Condition Evaluation for Soft Start of a Kind of Typical Induction Motor

Application of Fuzzy Control Theory to the Soft Starting of Induction Motor