Abstract:This paper addresses the measurement and modelling of the damaged properties of asphalt mixtures including the fracture, healing and viscoplastic deformation of the asphalt mixtures in both tensile and compressive loading as being affected by their composition and conditioning with ageing and exposure to temperature and moisture. An energy-based mechanics is applied to obtain the material fundamental properties such as surface energies, bond energies, anisotropy, yield functions and plastic potential functions that are valid for actual asphalt mixtures, viscoelastic crack growth criteria under both tensile and compressive loading, a simple mechanics-based method of determining the fatigue endurance limit, and the measurement and prediction of healing in restoring the damage done by fracture. Healing is anti-fracture and cracking is the net result of the interplay of these two complimentary mechanisms. Because fracture in asphalt mixtures is not the growth of a single crack but the simultaneous growth of multiple cracks that start out as air voids, this fact leads to the use of the growth of damage density to characterise fracture in an asphalt mixture. It was discovered that the form of Paris' law applies to the growth of damage density of asphalt mixtures in both tensile and compressive loadings. The importance of this fact lies in many developments from this discovery, e.g. compressive monotonic loading of cylindrical test samples permits a direct determination of the Paris' Law coefficient and exponent. In all cases, measured material properties are presented as they vary with mixture composition and with conditioning such as moisture and ageing, both in the lab and in the field. The measurements of these properties are made simply, quickly and accurately by the use of mechanics so that an entire characterisation of the properties of an asphalt mixture in tension and compression can be completed in the space of one day. The net effect is to reduce the efforts expended in the lab and the systematic error due to the assumptions made by the existing models and simultaneously to increase the efficiency and cost-effectiveness of materials testing and raise the reliability of the design of mixtures, pavement structures and specifications and the prediction of the life cycles in as-built pavements.

Measurement of Air Voids in Asphalt Mixtures

Effects of Air Void Content on Asphalt Mixture Performance

Effects of Asphalt Binder Type on Mixing Flowability and Workability Index of Asphalt Mixtures

Comparative Modelling of Indirect Tensile Strength of Asphalt Mixtures with and Without Considering Air Void Characteristics

Study on Low Noise Asphalt Pavement Mixture Design

Air voids distribution of asphalt mixtures in different compaction methods and aggregate gradations

Characteristics of Undamaged Asphalt Mixtures in Tension and Compression

Characteristics of Damaged Asphalt Mixtures in Tension and Compression

Criterion of Air Voids Based on Permeability Characteristic of Asphalt Mixture

Towards an Index of Asphalt Mixture Homogeneity

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Research on the Relationship Between Grading Curve Trend and Air Voids in Asphalt Mixtures

Test Research on Determining Theoretical Maximum Density of Asphalt Mixtures

Influence of Aggregates' Spatial Characteristics on Air-Voids in Asphalt Mixture

Experimental Study on Permeability Characteristic of Asphalt Mixture

Performance verification of various bulk density measurement methods for open- and gap-graded asphalt mixtures using X-ray computed tomography

Experimental measurements of the moisture diffusion and strength damage mechanism of dense asphalt mixtures

Vertical Void Distribution and Uniformity Analysis of Asphalt Mixtures Using Three-Stage Exponential Model

Statistical Analysis of the Asphalt Mixtures Volumetric Properties

Asphalt Mixtures Performance Research Based on Coarse Aggregate Surface Texture

Research on the Relationship Between Permanent Deformation and Air Void Structure of Asphalt Macadam Mixture