Abstract:Sulfur dispersion is the most common crosslinking agent for latex vulcanization.However,sulfur dispersion is unstable and its preparation process is complex,and toxic zinc-containing accelerators should be used together for effective crosslinking.In recent years,synthesizing sulfur copolymers through inverse vulcanization of elemental sulfur and vinyl monomers has received widespread attention.Herein,self-emulsified sulfur copolymers(STD)were prepared by inverse vulcanization of elemental sulfur,polysorbide 80 and 1,3-diisopropylbenzene.The effect of monomer feed ratio on the structure and yield of STD was studied.According to laser particle size distribution analyzer and scanning electron microscope measurements,STD emulsion could be stably dispersed in water for a long time with an average size of about 80 nm.Further,STD was used as the crosslinking agent for carboxylated nitrile rubber latex,and the influences of STD content and composition on the properties of crosslinked rubber were systematically studied.The results showed that the fractions of sulfur and polysorbate 80 in STD determine the properties of crosslinked rubber by affecting crosslinking density and plasticizing effect,respectively.Compared with sulfur dispersion,STD emulsion is more stable with smaller micelle size and has higher reactivity,which avoids using toxic zinc-containing accelerators and imparts the crosslinked networks with better mechanical properties,thus exploring new avenue for the green crosslinking of rubber latex and the preparation of high-performance rubber materials.

Preparation of sulfur-modified powdered CR by reverse-coagulation cover method:Ⅰ.Particle size distribution

Preparation of sulfur-modified powdered CR by reverse-coagulation cover method:Ⅱ.Mechanical properties

The Powdered Model of Sulfur-Modified Polychloroprene Rubber Latex in the Inverse-Coagulation Processing

The Preparation of Powdered Polychloroprene Rubber(pcr) Using Acidified Coagulation Method

Preparation of Sulfur‐modified Powdered Polychloroprene Rubber by Inverse Coagulation

Micron-Size Functional Uniform Pmma Particles by Dispersion Copolymerization in Polar Media

Study on Preparation of Polycarbonate Micro-Particles by Liquid Anti-Solvent Crystallization

Carbon Black (SRF) Filled Powdered Polychloroprene Rubber [P(CR/SRF)](Ⅰ) Particle Size Distribution

Carbon Black (SRF) Filled Powdered Polychloroprene Rubber [p(cr/srf)](ⅱ)mechanical Properties

Preparation of Powdered NR by Spray Drying Method and Study on Its Curing Behaviour

The Preparation and Characterization of SBR/PS Core-Shell Particles by Gamma Irradiation

Preparation and Structure Control of Hollow Polymer Particles——Synthesis and Effect on the Hollow Structure of the Core Latex

Effect of Particle Size Distribution on the Hydration and Compressive Strength Development of Α-Calcium Sulfate Hemihydrate Paste

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Modifying scrap rubber powder and its use in the mortar

Effect of emulsifier on the coagulation properties of SBR latex

Mastication Behavior of SBR/Carbon Black Masterbatchs Based on Latex Mixing

Studies on the Preparation of Cr Nanometer Powder

Ammonium Persulfate Modified Carbon Black and Its Reinforcement in Natural Rubber Latex by Latex Compounding Technique

Preparation of Gradient Polymer with Wide Damping Temperature Range by In-situ Sulfur Modification

Synthesis of Self-emulsified Sulfur Copolymer for Green Crosslinking of Rubber Latex