Abstract:Mechanical properties of steels are significantly enhanced by retained austenite. Particularly, it has been shown that a recently developed heat-treatment technique called Quenching and Partitioning (Q&P) stabilises austenite effectively. In the present work, the phase-field approach is adopted to simulate the phase transformation and carbon diffusion, which respectively accompanies the quenching and partitioning process of the polycrystalline Fe-C system. By incorporating the chemical driving-force from the CALPHAD database, the elastic phase-field model, which recovers the sharp-interface solutions, simulates the martensite ( α ′ ) transformation at three different quenching temperatures. The resulting martensite volume-fractions are in complete agreement with the analytical predictions. For the first time, in this study, the constrained carbon equilibrium (CCE) condition is introduced in the polycrystalline set-up to yield the predicted partitioning endpoints. Under the CCE condition, the carbon partitioning in two alloys of varying composition is analysed through the phase-field model which employs chemical potential as the dynamic variable. The volume fraction and distribution of retained austenite is determined from the carbon distribution and its temporal evolution during the partitioning is investigated. It is identified that in the initial stages of partitioning carbon gets accumulated in the austenite ( γ ) along the γ α ′ -interface, owing to the substantial difference in the diffusivities and CCE endpoints. This accumulation stabilises the austenite adjacent to the interface. However, depending on the martensite volume-fraction and the alloy composition, the evolution of the stabilised austenite varies. Furthermore, the influence of the phase distribution on the kinetics of the temporal evolution of retained austenite is elucidated.

PHASE IN Fe-C, Fe-C-Sb ALLOY SYSTEMS OBTAINED BY SPLAT QUENCHING

Effect of Co Addition on the Phase Structure and Magnetic Properties of Fe-Si-Al Alloys

DECOMPOSITION OF THE Ε-Phase OBTAINED BY MEANS OF SPLAT QUENCHING IN THE Fe-C-Sb ALLOY

Revealing the Phase-Transformation Path in a FeCoNiSnx Eutectic High Entropy Alloy System by Crystallographic Orientation Relationships

Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition

Phase Composition, Microstructure, and Mechanical Properties of Spark Plasma Sintered AlCrFeNiX (X = Co, Cu, and CoCu) High Entropy Alloys

Structure and phase transformation for Co72.7C 11.8Si15.5 magnetic alloy quenched at high temperature

The Phase Competition and Stability of High-Entropy Alloys

Rapid Solidification of Cu60Co30Cr10 Alloy under Different Conditions

New Fcc Phase Formed in Immiscible Fe-Cu System by Solid State Diffusion

Strengthening CoCrFeNi High Entropy Alloy by In-Situ Phases of Laves and ZrC

Low Temperature Phase Transformations in Copper-Quenched Ti-44.5Al-8Nb-2.5V Alloy.

METASTABLE PHASES IN VAPOR-QUENCHED AL78CU22 FILM

The phase transition in annealed mechanically alloyed Fe - Cu.

Microstructure evolution and metastable phase formation in undercooled Fe–30 at.% Co melt

Synthesis of Ultrafine Dual-Phase Structure in CrFeCoNiAl0.6 High Entropy Alloy Via Solid-State Phase Transformation During Sub-Rapid Solidification

Effects of Si solution in θ-Al13Fe4 on phase transformation between Fe-containing intermetallic compounds in Al alloys

Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy

Characterization of the Fe-6.5wt%Si Strip with Rapid Cooling Coupling Deep Supercooled Solidification

Phase-field Simulation of Phase Separation Coupled with Thermodynamic Databases in FeNiCrCoCu High-Entropy Alloys

Metastable Phase Formation in Eutectic Solidification of Highly Undercooled Fe83B17 Alloy Melt