Synthesis and Characterization of Lini1/3co1/3mn1/3o2 As Cathode Materials for Li-Ion Batteries Via an Efficacious Sol-Gel Method

Xiaoyu Cao,Yang Zhao,Limin Zhu,Lingling Xie,Xiaoli Cao,Shaoyi Xiong,Chiwei Wang

DOI: https://doi.org/10.20964/2016.06.93

IF: 1.541

2016-01-01

International Journal of Electrochemical Science

Abstract:A series of LiNi1/3Co1/3Mn1/3O2 powders have been successfully prepared as cathode materials for lithium-ion batteries by a citric acid-assisted sol-gel method. The crystal structures and microstructures of as-prepared cathode materials were characterized by X-ray diffraction and scanning electron microscopy. Charge/discharge cycling and cyclic voltammetry were also employed to investigate their electrochemical behaviors. X-ray diffraction results show that calcinations temperature and time have the important effects on the crystal structure of LiNi1/3Co1/3Mn1/3O2 powders. Among all the LiNi1/3Co1/3Mn1/3O2 powders, the LiNi1/3Co1/3Mn1/3O2 powder calcined at 850 degrees C for 16 h demonstrates a phase-pure hexagonal lattice with the best ordered layered structure. Scanning electron microscopy with element mapping tests reveal that the homogeneous LiNi1/3Co1/3Mn1/3O2 solid solution has been achieved via this synthesis method. The LiNi1/3Co1/3Mn1/3O2 powder heated at 850 degrees C for 16 h can deliver a high initial discharge capacity of 199.9 mAh g(-1) and still retain the discharge capacity of 143.6 mAh g(-1) after 80 cycles at the current rate of 20 mA g(-1) in the voltage range of 2.5-4.6 V. Cyclic voltammetry results confirm that as-obtained LiNi1/3Co1/3Mn1/3O2 powder at 850 degrees C for 16 h displays the decreased electrode polarization and stable crystal structure upon cycling.